nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Component react.community-search had an error.

ref must be one of: categoryID, siteSectionID, category, category/categoryID, category/name, category/description, category/url, category/allowedDiscussionTypes, locale, siteSection, siteSection/basePath, siteSection/contentLocale, siteSection/sectionGroup, siteSection/sectionID, siteSection/name, siteSection/description, siteSection/apps, siteSection/attributes, layoutViewType, discussionID, commentID, page, latest, sort, sortType, lookupSort, discussion, discussion/name, tags, breadcrumbs, discussionApiParams, serverDraftID, serverDraft.

ONTAP 9 Simulator: cannot access the GUI

sevenval

I am trying to run the ONTAP 9 Simulator but I cannot access the GUI. I will provide you all the details.

Virtualizer: VMWare Fusion 12.1.0

ONTAP: vsim-netapp-DOT9.7-cm_nodar.ova

I have followed what is explained in this guide https://community.netapp.com/fukiw75442/attachments/fukiw75442/simulator-discussions/2079/1/ONTAP-Sim-Getting_Started_Quick_v10.pdf but when I enter the username and password I am told that the credentials are not correct.

Here are the steps I followed:

* Import the ova in VMWare

* The VM boot and as described by the guide, I press CTRL-C in order to get the the boot menu

* At the boot menu I select the Option 4 "Clean configuration and initialize all disks"

* During the reset process no errors are reported, the VM boot again and I am asked to enter the following parameters:

IP: 192.168.77.10(as described in the guide I look with ifconfig at the vmnet8 interface)

Netmask: 255.255.255.0

Default Gateway: 192.168.77.2

Then comes that the rest of the config can also be finalized at https://192.168.77.10, but with the admin default credentials (https://library.netapp.com/ecmdocs/ECMP1148877/html/GUID-3954F916-F50C-4A41-83AB-61BE1C38854B.html#:~:text=You%20should%20be%20logged%20in,the%20password%20is%20netapp!123) I cannot go on, so I continue the configuration on the Console with:

* create cluster

* single node cluster

* set admin cluster node password

* cluster name

* Additional License Key (according to the instructions it can be left empty)

* domain name (according to the instructions it can be left empty)

* Where is the controller located (according to the instructions it can be left empty)

* system config backup (according to the instructions it can be left empty)

Then on the screen it is reported that the GUI can be accessed at https://192.168.77.10, so I give admin as username and the password that I have just created but no way to get into the GUI.

With the credentials that I created I can log into the Console and per SSH but not into the GUI.

With security login show I can see that the admin user can authenticate over all the protocols (see screenshot).

I have tried to set up another user, with admin role and authentication over HTTP + SSH + ONTAPI + CONSOLE but the result is always the same, Console and SSH is ok but the GUI not.

I also tried to set the License Key as described on the guide, everything works as described until the moment where I want to log into the GUI, here I always get "Login failed verify username and password".

Could you please provide some advice/idea?

Kind Regards,

Davide Motti

Screenshot 2020-12-03 at 15.13.36 (1).png

Find more posts tagged with

ONTAP Simulator

Comments

CHRISMAKI

Did you see the note on page 16:

NOTE: Be aware this guide mixes examples of the VMnet8 on different subnets (192.168.23.0 above, 17.0 later on, etc)

Are you using IP space suitable to your environment? The screenshot you provided isn't much help, at the same prompt can you please type "net int show" and provide the output of that?

sevenval

Hi, thank you for your answer but sorry what is the relationship between ip environment and not being able to log in to the GUI?
I don't think the network configuration has anything to do with the problem described above: I can access the GUI in the Browser without any problems, the problem is that I can't log in either with the default user or with other users that I have created after logging in from the CLI.

CHRISMAKI

Sorry for misunderstanding, but you literally started your original post with "cannot access the GUI".

Looking at your screenshot, that's a Cisco web page, not the ONTAP Cluster login. Please provide the previously requested output, or find out what IP the cluster_mgmt LIF is on, and try that instead.

sevenval

Hi, thank you for the answer.

The Gui that I try to reach is the GUI that ONTAP Install suggest to open in order to complete the setup (http://192.168.77.10).

The network configuration is setup as described on ONTAP-Sim-Getting_Started_Quick:

IP from vmnet8: 192.168.77.10

Netmask: 255.255.255.0

Gateway: 192.168.77.2

Screenshot 2021-01-05 at 15.25.52.png

But with username: admin and pwd: netapp!123 as in your guide described it says that the credentials are not correct:

Screenshot 2021-01-05 at 15.27.45.png

However with this credentials I am able to log into the CLI:

Screenshot 2021-01-05 at 15.32.00.png

And this ist the output of the command that you requested:

Screenshot 2021-01-05 at 15.32.56.png

P.S. I started my post with "cannot access the GUI" because this is my problem, I cannot access/log into the GUI. Over the CLI I can create users, cluster and so on, but I am not able to log into the GUI.

Thanks in advance.