nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Question about Simulator database recovery

shypervisor

I am using ontap simulator 9.7. At installation, simulator works fine with Web UI.

But for 24 hour interval, Web UI does not working. (cannot connect)

the console can logn, but command does not work.

How to solve this problem

```

ontapsim::> vserver nfs show

Error: show failed: database sequential_identifier_byname is not open

```

Find more posts tagged with

ONTAP Simulator

Accepted answers

CHRISMAKI

I believe the problem here is that your root volume has filled up as it usually does in the simulator. I just had a look at the deployment instructions for the 9.7 sim and I see they've removed this bit. Go have a look at page 40 & 41 of the 9.5 guide here and perform those instructions. You'll probably have to reboot as well.

All comments

CHRISMAKI

shypervisor

Thank you for your help.

Around page 40 and 41, two instruction exists. both instruction should be executed?

Disabling root snapshots
Expanding the root volume size

shypervisor

I change svm0_root from 20MB to 800MB. by using volume size expantion by using page 41 of Simulator 9.5 document .

I also disable snapshots for root volume (vol0).

The reason for chaning size is the ontap simulator freezes again.

CHRISMAKI

Is there any error messages in the console? Can you send a screen shot?

Yes, perform both procedures, p40 & p41.