nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

LIF FOR SAN (ONTAPP)

ashrafbinali

Dear All,

please help me for create Lif for SAN.

we have connected 2FC port each node. I created SVM and enabled FC Protocol.

I did not created Lif for FC. kindly advise below cmd is fine or not (What is recommendation for LIF )

which wwwn i will use for zone?

network interface create -vserver svm01 -lif lif01 -role data -data-protocol fcp -home-node node01 -home-port 2a
network interface create -vserver svm01 -lif lif02 -role data -data-protocol fcp -home-node node01 -home-port 2b
network interface create -vserver svm01 -lif lif03 -role data -data-protocol fcp -home-node node02 -home-port 2a
network interface create -vserver svm01 -lif lif02 -role data -data-protocol fcp -home-node node02 -home-port 2b

Find more posts tagged with

AFF

Accepted answers

SpindleNinja

each will have it's own. the physical target ports will have wwpns that start with 50: the lifs will start with 20:

All comments

SpindleNinja

you'll want to zone to the WWPN that is generated with the LIF.

ashrafbinali

Dear SpindleNinja,

every LIF interface has own wwpn? or single wwpn?

SpindleNinja

each will have it's own. the physical target ports will have wwpns that start with 50: the lifs will start with 20:

ashrafbinali

Thank You, is Below cmd correct for lif configuration

network interface create -vserver svm01 -lif lif01 -role data -data-protocol fcp -home-node node01 -home-port 2a
network interface create -vserver svm01 -lif lif02 -role data -data-protocol fcp -home-node node01 -home-port 2b
network interface create -vserver svm01 -lif lif03 -role data -data-protocol fcp -home-node node02 -home-port 2a
network interface create -vserver svm01 -lif lif02 -role data -data-protocol fcp -home-node node02 -home-port 2b