HI,
I assigned new disk to nodes, but the capacity still not added into container. How do I change current container to SATA01 container ? Please refer to picture.
That's correct. Create an aggr with 11 drives + 1 spare. and then whatever volumes you want on that. You will also move volumes between the two aggrs if you want.
I'd name the volume something different than the aggr name, just for easier mgmt. but it's your system.
You can't mix SAS and SATA in the same AGGR. (you can mix SSD and HDDs).
I would create a second all sas aggr leaving one spare.
HI. Thanks for the reply. Actually SATA01 it is just a container naming. All SAS type in my storage.
So I would like to know how do I change from Pool0 to SATA01 container so I could utilize the capacity.
Check here for the list of drive types - http://docs.netapp.com/us-en/ontap-sm-classic/online-help-96-97/concept_how_ontap_reports_drive_types.html
FSAS is the same as NL-SAS, which is typically 7.2K rpm. check the -rpm of the drives.
SAS is typically 10K rpm. I've noticed in my years of travel that a lot of folks use NL-SAS and SATA interchangeably.
storage drive show -fields rpm
Thanks @SpindleNinja for sharing the info.Anyway, do you have idea how do I utilize my new disk shelf after assigned ownership ?
