nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

On upgrade, vol0 gets corrupted

DRG

Hello all. I'm having trouble upgrading the NetApp simulator on ESXi. Upgrading through the boot menu doesn't work at all, but uploading it as a second image then making it the default works at first, but errors out upon reboot with vol0 getting corrupted. Doing a simple 'vol show' at that point, OnTap comes back with "there is no 'show'". I should state that I increased the vol0 space before the upgrade and there was still 1G free after uploading the image.

I should also state this is a single-node cluster, and I do see "corrupted replicated database" errors on boot.

Find more posts tagged with

ONTAP Simulator

Accepted answers

DRG

Before, after the upgrade reboot finished and everything looked good, I rebooted again. This time, after the first reboot and everything looked good, I accessed it through SSH and it said the upgrade was still in progress. I waited until I could SSH into the cluster without that message.

I also made sure there was no volume-related jobs before the upgrade.

Everything is good.

All comments

Ontapforrum

May be 1G is 'not enough' free space.

NetApp ONTAP 9.7 Simulator Upgrade How To (sysadmintutorials.com)

DRG

Like I said, 1G after the new image was uploaded

DRG

I also made sure there was no volume-related jobs before the upgrade.

Everything is good.