Hi All,
We have a FAS2650 2 node cluster with 12 disks each of 1.63TB.We have added another 5 disks to increase the aggregate space using the storage aggregate add-disks -aggregate sas_data_1 -raidgroup all -diskcount 5 command. The issue is that it is not showing any disk in spare pool. But each node has disks as Root-Data Partitioned Spares.
storage aggregate show-spare-disks
Original Owner: SAN1a
Pool0
Root-Data Partitioned Spares
Local Local
Data Root Physical
Disk Type Class RPM Checksum Usable Usable Size Status
---------------- ------ ----------- ------ -------------- -------- -------- -------- --------
1.0.11 SAS performance 10000 block 1.49TB 143.7GB 1.64TB zeroed
1.0.12 SAS performance 10000 block 1.49TB 0B 1.64TB zeroed
1.0.13 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
1.0.15 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
Original Owner: SAN1b
Pool0
Root-Data Partitioned Spares
Local Local
Data Root Physical
Disk Type Class RPM Checksum Usable Usable Size Status
---------------- ------ ----------- ------ -------------- -------- -------- -------- --------
1.0.10 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
1.0.12 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
1.0.14 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
1.0.16 SAS performance 10000 block 0B 143.7GB 1.64TB zeroed
8 entries were displayed.
Please advise
1)If this setup can survive a disk failure.
2) why is disk 1.0.12 showing as owned by both nodes
3) what can be done to get 1 disk into spare pool
