nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Cluster join failure and storage failover show the status of "Kernel loaded."

chenguanghui

Hi:

I had two very frustrating experiences today and I need some help:

1. Today I performed initial setup on both ends and prepared to create a cluster, but I found that one node would not join in despite my efforts. Just as I was about to give up, it suddenly joined successfully. Why is that? My system version is 9.14.1p16, and my device is a FAS2720.

2.Five minutes after the cluster is successfully created, I check the storage failover show and find that the status of controller A is kernel loaded. Finally, I check that the status of controller A is abnormal. The content of the error is like this:Waiting for giveback...(Press Ctrl-C to abort wait)
Waiting for giveback...(Press Ctrl-C to abort wait)Entering FM state:5 because mbFound:0 local in headswap:0
Entering FM state:5 because mbFound:0 local in headswap:0
Entering FM state:5 because mbFound:0 local in headswap:0