-
LUN or storage space allocation
How we can assign the storage space/LUN in there different scenario- 1 LUN assign to FC Servers 2 LUN Assign through NIC 3 Space allocated to windows server 4 Space allocated to Unix Servers Regards,
-
thick or thin provisioned
Dear All, How we can find the particular volume is thick or thin provisioned? Regards, Sunil Rawat
-
inodes queries
Hi, Can inodes increase indefinitely? If not, what is the max limit? Thanks in advance
-
Expand lun which is low on space but flexvol has plenty of free space
Hi All Probably a basic question but I just wanted to get this clarified by others. We use 7-mode and all our volumes are thin provisioned flex vols. All LUNs are thin provisioned as well and these are presented to VMware as datastores. We use deduplication as well. My question is if we have a datastore running low, we…
-
is there any command to find NetApp FAS model name via putty in 7 mode.
Hi all, I am new to NetApp storage. Could anyone help me the command to find NetApp model name (FAS XXXX). Other than sysconfig -a command. Thanks Lakshmanan
-
Disk Sanitization
For failed disks that still can be unfailed we use disk sanitization for wiping out any data before we return the disk to NetApp. To use disk sanitization we had to activate the option "licensed_feature.disk_sanitization.enable". After activation, this option can't be deactivated anymore. This is clearly documented in the…
-
Reduce size of LUN
Hello, For a temporarly reason I extend a volume and LUN size to 180Go (original 100Go). In my Windows 2008R2 Server I extend the volume too. When I finish my operation I wanted decrease the size to return in the original state. In Windows, I reduce the volume to 100Go, in the disk manager it is ok. The partition doing…
-
Aggregate creation best practices
Hi, Could any provide best practices to create agrregates and How to create aggregate with two node disks ? Thanks, Metro Life Team
-
Pre check health before running a fail-over
Hello is there any Linux or netapp 9 powershell Scrip we can run for pre check health before running a fail-over and also after for ONTAP 9? Or a set of commands to check everything. Thanks.
-
ldap configuration for multidomain envirement
We have windows forest with 3 sub-domain. For example: company.com (forest root domain) a.company.com (sub domain) b.company.com (sub domain) c.company.com (sub domain) All the user accounts and groups are on the sub domains. We have Linux systems and I have to configure ldap configuration on NetApp filer. My configuration…