Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

[trentino123]

Credentials were double checked working and valid. But the use of Connect-WFAController on 7mode equipment throws the following error 100% of the time:

Log messages:

Get-WfaCredentials -Host pirulo.com

Credentials successfully provided for 'pirulo.com'         ( and double checked!! )

Connect-NaController ( with credentials ) -name pirulo.com -Timeout 60000 -ErrorAction Stop -HTTPS

ERROR Failed to connect to controller : pirulo.com

ERROR Failed executing command. Exception : failed to connected to controller : pirulo.com  

Tried a POSH script importing the OnTap WFA module in the WFA server and the Connect-NaController command worked!

Therefore I believe the problem is within WFA, it started happening on Friday on all the 7mode controllers. Any thoughts ?

Thanks in advance!!

[abhit]

"workflow fails to connect to a 7-Mode filer after MS KB’s were applied to the Host OS"

A similar issue was observed recently by another customer. Just wanted to know if any MS KB's were applied

and post that if you are seeing this issue.

Regards

Abhi

[veerendra]

Hi ,

Can you Please check below links. It may help to reslove the Connect-WFAController issue. 

http://community.netapp.com/t5/Microsoft-Cloud-and-Virtualization-Discussions/API-invoke-failed/m-p/123542

http://community.netapp.com/t5/Microsoft-Cloud-and-Virtualization-Discussions/API-invoke-failed/m-p/124099#M5097

Regards,

Veerendranadh CH.

[sinhaa]

@trentino123

Have you been able to resolve this??

sinhaa