hello, sorry maybe my question is not on the good board, tell me the board so, I have a problem with one of my mirrored volume. it does not increase together. when i increase the original volume, its mirrored volume doesn't increase to. Fabien
Hi all, I have a FAS8300 X1147A network card, Does this network card support 25GB? If anyone knows the answer to the question, please reply to me. Thank you. Regards, Wang jun
Hi all, I hope you are doing well! I want to ask what the best timeout value for iSCSI block access using Cisco UCS will be for HA/metrocluster systems using FlexPod? The ESX host is booted from iSCSI LUN. VSC is not used in this case. Is the iSCSI timeout value defined on a software ISCSI initiator level (host side) or…
Hello experts, I'm going to ask if you're aware of any customers using VMware NSX in conjunction with FlexPod. From what I know the FlexPod reference architecture is not supporting VMware's NSX and I would like to get a confirmation about that. Then, according to the fact that FlexPod architecture is based on Cisco Nexus…
Cisco UCS B-Series, vSphere 6.5, FAS2650 with iSCSI SAN boot. Utilizing ESX storage vMotion for migration of virtual machines to new Datastores on new FAS2750 easy enough. Considering using SnapMirror to migrate and cutover the iSCSI SAN boot LUNS to the new FAS2750. Can anyone share procedure, experiences, tips on…
I'm attempting to configure a new installation of CSA 4.2 in our lab environment and I have been able to add vCenter, UCS Manager, and our NetApp Cluster without any trouble at all. However, adding the Nexus switches did not go as well. The devices authenticated just fine for the initial add but upon reaching out to…
Hi We are configurating one Flexpod solution. UCS 6296UP with Fas8020 Ontap 8.3 Direct Attached Storage for NFS This is the information found http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/whitepaper_c11-702584.html We are create the "appliance ports" but…
Hi, Anyone had an issue about CI keep collecting data from CSA portal ? I have confirmed the CSA agent Onprem has access to internet and done culrt -l www.csa.netapp with no issue. Also all devices are added to CSA Agent which can be picked up from CSA port to create a CI, however there is nothing show on Dashboard only…
Hi All, I'm attempting to replace the certificate for the IMPI on our H615C servers, however all combination I've tried are failing with either invalid cert or key. Does anyone know what combination should be used? Many thanks
Hi, can we download a trial version of NetApp Active IQ Config Advisor if exist . When i try to download it it display that there is 0 tools. Thanks for your help.
It looks like you're new here. Sign in or register to get started.