nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

NetApp-Harvest: Server returned HTTP Error

JF-Louvet

Hi all,

I have recently install Harvest 1.2.2 but get the following error when trying to poll for most of our 7mode controllers :

[PROD][root@parg3pharv001 netapp-harvest]# ./netapp-worker -poller n02sanp0002a
[2015-12-18 10:46:37] [NORMAL ] WORKER STARTED [Version: 1.2.2] [Conf: netapp-harvest.conf] [Poller: n02sanp0002a]
[2015-12-18 10:46:37] [WARNING] Started in foreground mode; messages to STDERR are redirected to the logfile and are not visible on the console.

[PROD][root@parg3pharv001 log]# tail -f n02sanp0002a_netapp-harvest.log
[2015-12-18 10:48:27] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error:
[2015-12-18 10:48:27] [WARNING] [main] system-info update failed; will try again in 10 seconds.
[2015-12-18 10:48:37] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error:
[2015-12-18 10:48:37] [WARNING] [main] system-info update failed; will try again in 10 seconds.

[PROD][root@parg3pharv001 log]# tail -f ntapprdmd1_netapp-harvest.log
[2015-12-18 10:50:00] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error:
[2015-12-18 10:50:00] [WARNING] [main] system-info update failed; will try again in 10 seconds.
[2015-12-18 10:50:10] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error:
[2015-12-18 10:50:10] [WARNING] [main] system-info update failed; will try again in 10 seconds.

....

I can't seem to find supporting information for this error? Any information would be great

Thanks

Jef

Find more posts tagged with

Performance Manager

Active IQ Unified Manager

Accepted answers

madden

Hi @JF-Louvet

If TLS is not enabled you can get some vague empty errors like this. Is TLS enabled?

netapp> options tls.enable on

Cheers,
Chris Madden

Storage Architect, NetApp EMEA (and author of Harvest)

Blog: It all begins with data

P.S. Please select “Options” and then “Accept as Solution” if this response answered your question so that others will find it easily!

All comments

madden

Hi @JF-Louvet

If TLS is not enabled you can get some vague empty errors like this. Is TLS enabled?

netapp> options tls.enable on

Cheers,
Chris Madden

Storage Architect, NetApp EMEA (and author of Harvest)

Blog: It all begins with data

P.S. Please select “Options” and then “Accept as Solution” if this response answered your question so that others will find it easily!

JF-Louvet

LAck of attention. Smiley Frustrated

Many thanks for your help Smiley Happy

Adam-Gross

Ran into this myself, but it's an older version of ONTAP with no tls.enable option (8.0.3P4). Will Harvest not be able to run against those controllers?

madden

H @Adam-Gross

Because vulnerabilities were discovered in SSL v3 you can no longer guarantee communications using it are secure. As a result the SDK was also adapted to require TLS and I added the instructions to enable TLS in Data ONTAP. If you have controllers that don't support TLS and you can't or don't want to upgrade them to a release that does, as a workaround you could use an older version of the SDK (I suggest 5.3) that still non TLS connections.

Here are the steps:

1) Download http://mysupport.netapp.com/NOW/download/software/nmsdk/5.3/ from the support site and copy into /tmp.

2) Extract it:

cd /tmp

unzip netapp-manageability-sdk-5.3.zip netapp-manageability-sdk-5.3/lib/perl/NetApp/*

3) Stop the poller

/opt/netapp-harvest/netapp-manager -stop

4) Rename current lib

mv /opt/netapp-harvest/lib /opt/netapp-harvest/lib-old

5) Copy 5.3 lib in place

mv netapp-manageability-sdk-5.3/lib/perl/NetApp/* /opt/netapp-harvest/lib

6) Start poller

/opt/netapp-harvest/netapp-manager -start

Please post if this allows collection or not, and kudos if it is indeed a solution for you.

Cheers,
Chris Madden

Storage Architect, NetApp EMEA (and author of Harvest)

Blog: It all begins with data

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO

Nareshchamarti

I am getting below error while adding my 7-mode nodes. I have enabled options tls.enable on. Please help me to get this resolved

Nodes are running with “NetApp Release 8.2.3P6 7-Mode” and nabox version: “NAbox 2.4.1 (2017-12-04)”

failed(13001) : Server returned HTTP Error: 503 Administrative

Martin_Sandell

Hello.

This is a very old post... so I have no idea if it will serve you who asked the question, but serve someone like me who found it years later with the same issue!

I found I needed three things enabled in the 7-mode system for it to work:
options httpd.admin.access
httpd.admin.access all (or at least the harvest system)

options httpd.admin.ssl.enable
httpd.admin.ssl.enable on

options tls.enable
tls.enable on

So check those settings!

Regards, Martin Sandell