Subscribe

.Snapcenter issue communicating to NAS file catalog on port 8145

[ Edited ]

Hello Gent's,

 

Snapcenter 2.0  issue communicating to NAS file catalog on port 8145, port on the liux server is not opened.

 

2017-06-17T23:02:22.9232329+01:00 ERROR SnapManagerWeb_20 PID=[5288] TID=[ApisJobNotificationHandler:210] Exception in method: InvokeXML. System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.0.000.000:8145 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6,

 

ERROR SnapManagerWeb_19 PID=[5288] TID=[ApisJobNotificationHandler:210] System.InvalidCastException: Unable to cast object of type 'SnapMgrContracts.SmJobData' to
type 'SMCoreContracts.SmApplyProtectionRequest'. at SnapManager.SMSDAL.Job.JobHelper.GetJobData[T](Int64 jobId)

 

 

Any other port to be used ? 

 

var/opt/snapcenter/spl/etc/spl.properties

SPL_PORT=8145

 

Thanks

Chaitan

Re: .Snapcenter issue communicating to NAS file catalog on port 8145

Hi,

 

The port needs to be open on the agent host. Check if a firewall is running on the agent host:

            # service iptables status
            If the firewall is running, you either need to open port 8145 on it or turn it off. Run the following command to turn off the port:
            # service iptables stop
To test if the connectivity has been restored, go to the Inventory page in the SnapCenter GUI and select 'Refresh Resources'

 

Refer: https://kb.netapp.com/support/s/article/ka11A0000001XOAQA2/SnapCenter-Oracle-Plug-in-installation-fails-with-Plug-in-incompatible (requires login)

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.