Subscribe

aggr snap restore hung

Greetings, 

    I am waiting for support to help me with this issue, but I thought I would try the community forum while I wait. I have the following problem:

 

I did an:

 

aggr copy aggr1 backup

 

Once this finished, I brought the aggr online to verify the data

 

Then I did:

 

snap restore -A nightly.0 backup

 

This resulted in the following:

 

WARNING! This will revert the aggregate to a previous snapshot.

All modifications to the aggregate after the snapshot will be

irrevocably lost.

 

Aggregate backup will be made restricted briefly before coming back online.

 

Are you sure you want to do this? y

 

It took a few minutes for this command to return. I now have an aggr that is in an offline state with the following error:

 

aggr status -v backup

           Aggr State           Status            Options

         backup unmounting      raid_dp, aggr     nosnap=off, raidtype=raid_dp,

                                                  raidsize=12,

                                                  ignore_inconsistent=off,

                                                  snapmirrored=off,

                                                  resyncsnaptime=60,

                                                  fs_size_fixed=off,

                                                  snapshot_autodelete=on,

                                                  lost_write_protect=on

Volumes: <none>

 

                Plex /backup/plex0: online, normal, active

                    RAID group /backup/plex0/rg0: normal

                    RAID group /backup/plex0/rg1: normal

 

It's been stuck in this state for the last 20 hours.

 

Hoping someone has some suggestions or ideas.

 

Thanks,

     -Steve