Subscribe
Highlighted

7-mode fpolicy

Hello,

 

Does ONTAP 7-mode fpolicy support reporting to an external server? If so, how would I go about configuring 7-mode to report to an external server?

 

I used the following commands on ONTAP c-mode to configure an fpolicy server

 

 

Create FPolicy engine
vserver fpolicy policy external-engine create -vserver vserver_name -engine-name engine_name -primary-servers ip -port 8080 -ssl-option no-auth
 
Create FPolicy event

vserver fpolicy policy event create -vserver vserver_name -event-name events_name -protocol cifs -file-operations read,write,create,delete -filters first_read,first_write

 

Create FPolicy policy
vserver fpolicy policy create -vserver vserver_name -policy-name policy_name -events events_name -engine engine_name
 
Create FPolicy scope
vserver fpolicy policy scope create -vserver vserver_name -policy-name policy_name -volumes-to-include *
 
Enable FPolicy
vserver fpolicy enable -vserver vserver_name -policy-name policy_name -sequence-number 1

 

 

Will it work the same and how would I translate the above to the 7-mode equivalent commands?

What formats/protocols does the 7-mode fpolicy support?

 

Thanks for your replies and time.

Re: 7-mode fpolicy

Hi,

 

Please refer https://library.netapp.com/ecmdocs/ECMM1277790/html/filesag/GUID-A7DBFCD5-4620-4423-8284-035BE31727C0.html

Refer fpolicy work flowchart and limitations of Fpolicy section

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.