Subscribe

Efficiency undo snapvault destination

[ Edited ]

Hi All

 

I have disabled the efficiency Setting on some snapvault destinations Volume, but the Volumes are still a part of the output from "efficiency show":

 

svm0001 
           svm0001_ora_db01_redo1_SV
                            Disabled Idle         Idle for 2822:01:12
                                                                     -
svm0001
          svm0001_ora_db01_redo2_SV
                            Disabled Idle         Idle for 2822:01:13

 

Only a "efficiency undo" removes the Volumes from the "efficiency show" Output. When I execute "efficiency undo" on the snapvault destination Volume, following error Message pops-up:

 

Invalid operation on a SnapVault secondary volume

 

Do someone known a procedure for removing a snapvault Destination Volume from the "efficiency show" Output?

 

TIA

Thomas

Re: Efficiency undo snapvault destination

Hi,

 

TR-3966 gives very good explaination on Snapvault destination volumes. page no 57 onwards.

Also check https://library.netapp.com/ecm/ecm_download_file/ECMP1610205 page no 157 "Managing storage efficiency for SnapVault secondaries"

Hope this helps.

Thanks.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

Re: Efficiency undo snapvault destination

Hi

 

Thanks for your answer..

 

I have seen this Docs before I Post my Question, but my Problem is not covered in this Docs (I thought)..

 

regards

Thomas