SnapMirror log parser

mg · ‎2012-09-24

Hello,

While looking at a way to automate SnapMirror logs extraction and consolidation, I've found Get-NaSystemLog -SnapMirror in the toolkit.

I've written a script close to the parser available in Tool Chest on support website, feel free to send me your comments.

Script requires PS toolkit, so if not loaded, change path to it accordingly in the script.

NEW VERSION 0.2 with following changes:

- Added "Last" parameter to process only <X> last lines from SnapMirror log

- Fixed transfer hash valid key detection

Enjoy!

Michel

mcgue · ‎2012-11-30

Michel,

Nice work! Definitely helpful. I'm wondering if some code could be added to have an option of opening a copy of the snapmirror log from a local drive (well, I'm sure it could be, I'm still cutting my teeth on PS still so I'm challenging myself to figure it out too!).

mg · ‎2012-11-30

Thanks!

I had a quick look and there's -Path parameter:

Get-NaSystemLog -SnapMirror [-EventType <String[]>] [-StartTime <DateTime>]

[-EndTime <DateTime>] [[-Path] <String>] [-Follow] [-Controller <NaControlle

r>] [<CommonParameters>]

Unfortunately -Controller parameter is mandatory, meaning it can't parse a local file, but you could possibly copy the file you got to a local Filer, then parse that specific file:

PS C:\temp> Get-NaSystemLog -SnapMirror -Path /vol/vol0/etc/log/snapmirror.mg

TimeStampDT Type EventInfo

----------- ---- ---------

12/1/2012 1:35:02 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Start

12/1/2012 1:35:02 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Start

12/1/2012 1:35:04 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root End (124 KB)

12/1/2012 1:35:05 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data End (7948 KB)

12/1/2012 1:50:00 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Request (Scheduled)

12/1/2012 1:50:00 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Request (Scheduled)

12/1/2012 1:50:03 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Start

12/1/2012 1:50:03 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Start

12/1/2012 1:50:04 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root End (104 KB)

12/1/2012 1:50:05 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data End (8300 KB)

12/1/2012 2:05:00 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Request (Scheduled)

12/1/2012 2:05:00 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Request (Scheduled)

12/1/2012 2:05:02 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Start

12/1/2012 2:05:03 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Start

12/1/2012 2:05:04 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root End (256 KB)

12/1/2012 2:05:05 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data End (8188 KB)

12/1/2012 2:20:00 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Request (Scheduled)

12/1/2012 2:20:00 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Request (Scheduled)

12/1/2012 2:20:02 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root Start

12/1/2012 2:20:02 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data Start

12/1/2012 2:20:03 AM dst naluxfas01:naluxvfvm01_root naluxfas02:naluxvfvm01_root End (96 KB)

12/1/2012 2:20:05 AM dst naluxfas01:naluxvfvm01_data naluxfas02:naluxvfvm01_data End (8304 KB)

TPHANENDRA · ‎2013-07-03

Hi,

I am beginner to PowerShell, Could anyone please tell me what is the Controller input and how I have to run the smsv-parser program.

Regards,

Phani T

vinith · ‎2013-07-04

Hello, Its a CMDLET which would let you extract this information.

From your powershell prompt type in below command to get a detailed help regarding this cmdlet

PS C:\Windows\system32> Get-Help Get-NaSystemLog -Detailed

Check out http://www.powershellpro.com/ , it would help you in getting started with powershell.

mg · ‎2013-07-04

Hello,

You can get help about the script using "get-help" command against the script:

PS D:\Scripts> get-help .\smsv-parser.ps1 -detailed

NAME

D:\Scripts\smsv-parser.ps1

SYNOPSIS

Produce a CSV file from a specified controller snapmirror.log

SYNTAX

D:\Scripts\smsv-parser.ps1 [-Controller] <String> [[-Out] <String>] [[-Last] <Int32>] [-LastWeek] [<CommonParameters>]

DESCRIPTION

Produce a CSV file from a specified controller snapmirror.log

PARAMETERS

-Controller <String>

Storage controller which to retrieve logs from

-Out <String>

Optional output file name. If not specified, output file will be in current folder

and will be name "smsv-parser_<controller name>.csv

-Last <Int32>

Optional number to retrieve <number> last lines from logs

-LastWeek [<SwitchParameter>]

Optional switch to retrieve logs of the previous week (Monday to Sunday)

This cmdlet supports the common parameters: Verbose, Debug,

ErrorAction, ErrorVariable, WarningAction, WarningVariable,

OutBuffer and OutVariable. For more information, type,

"get-help about_commonparameters".

-------------------------- EXAMPLE 1 --------------------------

C:\PS>smsv-parser.ps1 -Controller naluxfas02

-------------------------- EXAMPLE 2 --------------------------

C:\PS>smsv-parser.ps1 -Controller naluxfas02 -Out file.csv

-------------------------- EXAMPLE 3 --------------------------

C:\PS>smsv-parser.ps1 -Controller naluxfas02 -Out file.csv -LastWeek

-------------------------- EXAMPLE 4 --------------------------

C:\PS>smsv-parser.ps1 -Controller naluxfas02 -Out file.csv -Last 50

mcgue · ‎2015-09-18

Great script Michel! I made a few edits to allow the optional reading from a SnapMirror log file as compared to getting the data from a controller. I have attached it to this reply.

mcgue · ‎2016-02-11

I added a few modifications (getting data from yesterday and time/date stamping the results file). Attached is the results of those changes.

SnapMirror log parser

Portfolio Updates | NetApp ONAIR