Collection of Scripts and Articles

Question

Scripts

* SAN Info 
* SSL Certificate Renew/Recreate
* SnapMirror Log Parser for CDOT
* ONTAP 8.3.2 Readiness Check Script
* SnapMirror Log Parser for 7-Mode
* Convert 7-Mode Commands and Options to CDOT
* Perfstat GUI for Previous ONTAP Releases

Articles

* How to Convert from a VLAN Tagged Singlemode Interface Group (IFGRP) to VLAN Tagged Ports 
* How to apply a new node name to the service processor prompt 
* The Commands "netboot" or "boot_recovery" Unexpectedly Attempts to Retrieve DHCP IP Address for e0M Port Set with a Static IP 
* How to Identify AFF A400 from Loader Prompt 
* How to Interpret "fc-port" and "uc-port" Loader Variables 
* 40GbE Adapter Missing or Disappears from ONTAP After Firmware Downgrade 
* HA interconnect shows down and no link lights on e0b and e1b ports on AFF A800 
* Browsing to ONTAP System Manager generates security or certificate related errors 
* How to move a port from one broadcast-domain to another broadcast-domain while LIFs are using the port within ONTAP 9 
* How to repurpose an HA Pair with ONTAP 9 
* AFF A800 boots to Aptio setup utility 
* Downloading ONTAP image fails with "The file downloaded is too large" or "Error: Transferred a partial file" 
* How to determine if an AFF or FAS model supports an external USB device 
* System Manager reports "The partner node details were not found for the node..." during Initialize Storage System process 
* How to install a Certificate Authority (CA) signed certificate in ONTAP for System Manager use 
* How to determine SMB protocol used for domain controller connection within an ONTAP SVM 
* FAS/AFF 8000 Series system boots into "Phoenix SecureCore Tiano Setup" menu 
* How to migrate interconnect switches from NetApp CN1610 to Cisco Nexus 3232C with 40GbE update 
* How to use boot menu option "(6) Update flash from backup config." within ONTAP 
* How to physically populate a DS224C or NS224 disk shelf with a partial set of disks 
* Nicadmin convert command in ONTAP maintenance mode produces error "Conversion of port_name is not supported" 
* How to interpret presets.haosc loader variable in ONTAP 
* How to evacuate data from file system disks to prepare for a hot shelf removal within ONTAP 
* token.vol.is.compressed EMS event during copy offload attempt in ONTAP 
* What open source or free web servers are available to assist with system administration? 
* How to set the authentication protocol and privacy protocol passwords for the snmpv3user SNMPv3 user on a Brocade switch

Mjizzini · Accepted Answer

Very helpful script. Thank you!