I just patched an OnTAP Select system for the first time. It went very smoothly, however one command that was listed in the Config Advisor document doesn't exist. One of the preliminary steps says: ----------------------------------------------------- 8. Backup ONTAP system information * Create a backup of ONTAP 9.5P6 system information by entering the following dvadmin command: vm config backup vm_name backup_name The backup includes the virtual machine configuration and all information on the ONTAP 9.5P6 system disks. ----------------------------------------------------- The vm config backup command doesn't exist in OnTAP Select. I found some docs online that seem to indicate it existed in the earlier tool that Select replaced, called OnTAP Edge. Does anyone know what this command is replaced with in OnTAP Select, if anything?

nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

vm config backup in OnTAP Select

TMADOCTHOMAS

I just patched an OnTAP Select system for the first time. It went very smoothly, however one command that was listed in the Config Advisor document doesn't exist. One of the preliminary steps says:

-----------------------------------------------------

8. Backup ONTAP system information

Create a backup of ONTAP 9.5P6 system information by entering the following dvadmin command:

vm config backup vm_name backup_name

The backup includes the virtual machine configuration and all information on the ONTAP 9.5P6 system
disks.

-----------------------------------------------------

The vm config backup command doesn't exist in OnTAP Select. I found some docs online that seem to indicate it existed in the earlier tool that Select replaced, called OnTAP Edge. Does anyone know what this command is replaced with in OnTAP Select, if anything?

Find more posts tagged with

ONTAP Select

ONTAP 9

Accepted answers

mrahul

The only supported method for backing up ONTAP Select is SnapMirror, SnapVault, or SVM DR (where applicable). ONTAP Select VM uses independent-persistent drives, which are excluded from VMware-based snapshots. So, it cannot be backed up with VMware or other third-party snapshots.

All comments

mrahul

To create a backup after deploying an ONTAP Select cluster

Issue the command "deploy backup create -foreground -name <backup file name>". You will be prompted for a password used to encrypt the backup file.

Record the password as you will be unable to decrypt the file without this password.

Issue command "deploy backup show -name <backup file name>-detailed". This will provide you with the location of the backup file created.

TMADOCTHOMAS

Thanks @mrahul , however that command backs up the OnTAP Select Deploy VM itself. The command referenced in Upgrade Advisor is for backing up the OnTAP Select VMs.

mrahul

TMADOCTHOMAS

Thanks @mrahul . I was just trying to find out why the NetApp-provided Upgrade Advisor referenced a command that doesn't exist for backing up the OnTAP Select VMs, and if there was a replacement command. From what you are saying, it sounds like this is not this case. At any rate, seems that the Upgrade Advisor document needs to be updated to remove that reference.

Sebastian_Goetze

Just to be clear, the command given did not back up the VM, just the config info about it:

vm config backup
Creates a backup of Data ONTAP Edge system information

These days with Deploy and ONTAP Select the commands are (similar to what @mrahul mentioned before):

1. Sign in to the Deploy utility CLI using SSH with the administrator account.
2. Create a backup of the Deploy configuration data, which is stored in an internal directory at the Deploy
server:
deploy backup create
3. Provide a password for the backup when prompted.
The backup file is encrypted based on the password.
4. Display the available backups in the system:
deploy backup show -detailed
5. Select your backup file based on the date in the Created field and record the Download URL value.
You can access the backup file through the URL.
6. Using a web browser or utility such as Curl, download the backup file to your local workstation with the
URL.