nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

"cluster_mgmt extended status: This LIF is down...

SEIMTEXTER

...because it is not configured in the network stack on node "2552-01". Wait a few minutes, then check the LIF's status again."

I have a FAS2552 that I can't add to oncommand system manager because its cluster management address is not responding, due to the error message above. I don't know how to configure cluster_mgmt on node 01, but I also don't see how its any different than the configuration on node 02.

Ontap 9.7. running
network port show -node 2552-01 (or 2552-02) -port e0M
there's no difference in the output. What is going on?

I can't get this to work. Thanks for any info.

Find more posts tagged with

FAS

ONTAP

Networking

cDOT

Accepted answers

jcolonfzenpr

Network Management Guide for ONTAP 9.7 and Earlier:

https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/home.html

It was pinging today while IsHome was false, but the moment I reverted it, it went down again <+++ weird behavior

1. check for duplicate address

2. try to change the IP to other than .250

3. try to reboot the switch

4. try to reboot the laptop

Good luck!

All comments

jcolonfzenpr

can you show the output of?

network interface -role cluster-mgmt

network interface -role node-mgmt

network port show -health

Regards,

SEIMTEXTER

network interface -role cluster-mgmt

and

network interface -role node-mgmt

These aren't working from either the cluster level or individual node

but here's command #3

jcolonfzenpr

Sorry my mistake:

network interface show -role cluster-mgmt

network interface show -role node-mgmt

or simply

network interface show

SEIMTEXTER

here we go.

I just noticed the e0a reporting a "false" status under the isHome column, so i've just reverted it. interface still down though.