Hi,

    Can you run this command/cli on your dfm server and find what is the ip address configured and change the same.

[root@vmlnx221-118 ~]# dfm host get <filername-or-id>

Host:                                        filer.name.domain

Login:                                       root

Password:                                    ********

Login Protocol:                              rsh

Preferred IP address 1:

Preferred IP address 2:

Primary IP Address:                          10.x.x.x.

Remote Platform Management IP Address:

Console Terminal Server Address:

Host CPU Too Busy Threshold (%):             95

Host CPU Busy Threshold Interval:            00:15:00

Ping Method:                                 echo_snmp

Administration Transport:                    http

NDMP Login:                                  root

NDMP Password:                               ********

Administration Port:                         80

Performance Advisor Transport:               httpOnly

Preferred SNMP Version:                      1

Hosts.equiv Enabled:                         No

Maximum Active Data Transfers:

Performance Advisor Data Export Enabled:     No

Host vFiler Default Interface:

Primary IP Address Inconsistency Action:

Automatically collect per-client statistics: No

Host clock skew threshold:                   1 minute

Host clock nearly skewed threshold:          30 seconds

[root@vmlnx221-118 ~]#

Find what is the IP address against the option named hostPrimaryAddress. DFM communicates with the filer/controller using the IP specified against this opitons.

Use dfm host set <filername-or-id> hostPrimaryAddress=<new IP address accessible via WFA/DFM>

Hope this helps and solves your issue.

Regards

adai