Subscribe

About Simulator cDot 8.2 Licenses show

[ Edited ]

Hello Support

 

I have a problem about cDot 8.2 Licenses add question.

After add license use the  license add -license-code command to add license and use license show /license status show check the flowing result .

yongl::> version

NetApp Release 8.2.1 Cluster-Mode: Fri Mar 21 14:25:07 PDT 2014

yongl::> license add -license-code

  <License Code V2>           License Code V2

yongl::> license add -license-code CAYHXPKBFDUFZGABGAAAAAAAAAAA

  (system license add)

License for package "CIFS" and serial number "1-81-0000000000000004082368511" installed successfully.

(1 of 1 added successfully)

yongl::> license status show

  (system license status show)

Package            Licensed Method  Expiration

-----------------  ---------------  --------------------

Base               license          -

NFS                none             -

CIFS               none             -

iSCSI              none             -

FCP                none             -

CDMI               none             -

SnapRestore        none             -

SnapMirror         none             -

FlexClone          none             -

SnapVault          none             -

SnapLock           none             -

SnapManagerSuite   none             -

SnapProtectApps    none             -

V_StorageAttach    none             -

SnapLock_Enterprise

                   none             -

Insight_Balance    none             -

16 entries were displayed.

 

Now I have not to license about cifs successful.

would you please give a solution to resolve it.

 

Re: About Simulator cDot 8.2 Licenses show

Sounds like you entered a valid CIFS license but not for any of the nodes in your cluster. Enter your cluster and/or node serial numbers in the support site and confirm. 

Re: About Simulator cDot 8.2 Licenses show

Hello CHRISMAKI

 

This is simulator, and the serial numbers all is same.

One is Serial Number: 1-80-000011

and a other one is

Serial Number: 1-81-0000000000000004082368511.

 

And other same Serial Number simulator ONTAP can use same license to registry normal.

 

You can use ssh to access 10.128.142.120 to check it.

user: admin

Password: P@ssw0rd

Re: About Simulator cDot 8.2 Licenses show

Since I'm not internal to NetApp I am unable to login to that IP, I did however look up the licenses here and the appropriate one is actually:

 

KUUNCAFTVDDCMAXAGAAAAAAAAAAA

Not the one you entered.

Re: About Simulator cDot 8.2 Licenses show

It is still not work.

 


yongl::> license add -license-code KUUNCAFTVDDCMAXAGAAAAAAAAAAA
(system license add)
License for package "CIFS" and serial number "1-81-0000000000000004079432753" installed successfully.
(1 of 1 added successfully)


yongl::> license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base license -
NFS none -
CIFS none -
iSCSI none -
FCP none -
CDMI none -
SnapRestore none -
SnapMirror none -
FlexClone none -
SnapVault none -
SnapLock none -
SnapManagerSuite none -
SnapProtectApps none -
V_StorageAttach none -
SnapLock_Enterprise
none -
Insight_Balance none -
16 entries were displayed.

yongl::>

Re: About Simulator cDot 8.2 Licenses show

Do not you need base cluster license first?

Re: About Simulator cDot 8.2 Licenses show

the Base license was registed 

 

yongl::smileyembarrassed: license status show
(system license status show)
Package Licensed Method Expiration
----------------- --------------- --------------------
Base license -

Re: About Simulator cDot 8.2 Licenses show

Since you used some other CIFS license, it's likely you used the improper Base license as well, try applying the following Base license:

 

SMKQROWJNQYQSDAAAAAAAAAAAAAA

Which should change your cluster serial and make CIFS work.

Re: About Simulator cDot 8.2 Licenses show

What's the status of this issue? 

Re: About Simulator cDot 8.2 Licenses show

 

Run this command:

system node show -fields node,systemid,serialnumber

 

have a look at the serial numbers in the output, and intall the licenses for those serial numbers.