The transition to NetApp MS Azure AD B2C is complete. If you missed the pre-registration, you will be invited to register at next log in.
Please note that access to your NetApp data may take up to 1 hour.
To learn more, read the FAQ and watch the video.
Need assistance? Complete this form and select “Registration Issue” as the Feedback Category.

AFF

AFF 200 change Vlan for NFS SVM

thomas382

Hello;

 

I have an working NFS SVM with our Server Vlan (id 55), for security reasons i want to change this to a new Vlan  (id 10).

This NFS Exports are for the VMWare vCenter Datastores.

I changed the network settings of the ESXI for the new Vlan 10, the Interfaces are pingable and working.

On the existing NFS SVM i created a new NFS Lif in the new Vlan 10, but from this Interface i cannot ping the ESXI.

The Switch Config seems to be ok.

Do i need to delete the existing NFS Lif that the new is working?

Do i need to create a new NFS SVM or will it work with the existing?

Many Thanks, Thomas

1 ACCEPTED SOLUTION

thomas382

Thanks for the Reply,

I upgraded CDot 9.5 on friday so i used this command:

cluster1::> network port vlan create -node cluster-1-01 -vlan-name a0a-10

after that i did:

cluster1::> network port broadcast-domain add-ports -broadcast-domain Data_55 -ports cluster1-01:a0a-10 cluster1-02:a0a-10

Now i have the Broadcast domain Data_55 with:

a0a type if_group with 4 physical ports: e0c, e0d, e0e, e0f

a0a-10 type vlan

I migrated the svm_nfs_10 to the a0a-10 vlan port and it is pingale

Thanks a lot, works fine!

 

View solution in original post

2 REPLIES 2

TMAC_CTG

Add the VLAN:

vlan create -node xxx-01 -name a0a-10

vlan create -node xxx-02 -name a0a-10

 

Add the VLAN to broadcast domain:

broadcast-domain add-port ..... -port xxx-01:a0a-10,xxx-02:a0a-10

 

Test it out:

Externally, ping one of the NETAPP LIFS. While that is running:

 

Net int migrate -lif abc -vserver xyz -destination-port a0a-10

 

If the ping still works, continue. If not revert it back and see what was missed

 

Finish:

net int modify -vserver xyz -lif abc|bcd -destination-port a0a-10

net int revert  -vserver xyz -lif abc|bcd

 

Clean up

 

Broadcast-domain remove-port .... -port xxx-01:a0a-55,xxx-02:a0a-55

 

Hope that helps.

thomas382

Thanks for the Reply,

I upgraded CDot 9.5 on friday so i used this command:

cluster1::> network port vlan create -node cluster-1-01 -vlan-name a0a-10

after that i did:

cluster1::> network port broadcast-domain add-ports -broadcast-domain Data_55 -ports cluster1-01:a0a-10 cluster1-02:a0a-10

Now i have the Broadcast domain Data_55 with:

a0a type if_group with 4 physical ports: e0c, e0d, e0e, e0f

a0a-10 type vlan

I migrated the svm_nfs_10 to the a0a-10 vlan port and it is pingale

Thanks a lot, works fine!

 

View solution in original post

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public