Hi Tech Guys,
My system shows the following error message after I install a A200 system. It shows a CriticalFruNotPresentAlert on the dashboard.
A200C::> system chassis fru show
Chassis ID FRU Type State Nodes Sharing the FRU
------------------- ---------- -------- ----------- -----------------------
021710019376 A200C-02 controller
degraded A200C-02
021710019376 A200C-01 controller
ok A200C-01
021710019376 PSU1 FRU psu GOOD A200C-01
021710019376 PSU2 FRU psu GOOD A200C-01
021710019376 PSU1 FRU psu NOT_PRESENT A200C-02
021710019376 PSU2 FRU psu NOT_PRESENT A200C-02
6 entries were displayed.
Then about one day later, I check again and it becomes normal.
A200C::> system chassis fru show
Chassis ID FRU Type State Nodes Sharing the FRU
------------------- ---------- -------- ----------- -----------------------
021710019376 A200C-02 controller
ok A200C-02
021710019376 A200C-01 controller
ok A200C-01
021710019376 PSU1 FRU psu GOOD A200C-02, A200C-01
021710019376 PSU2 FRU psu GOOD A200C-02, A200C-01
I would like to know what is the error about?
