Hi I just got a new AFF C-Series About to replicate from a FAS2750 I have 12 x 15.3TB disks. However, the aggregate I was able to create from this amounted to less than 70TB. I need this to make sense. Effective storage should get to some 100TB though, right?
... View more
Hello team, For security reason I need to change all passwords on Netapp infrastructure. The controller is AFF A400 with DS 224 C. Is there any procedure existing maybe for this request? And do you know how many credential I can have to change on it? Thanks Regards,
... View more
Hello, everyone. I am manually obtaining autosupport logs. I configured the Ethernet port of my computer on the same network segment as the storage management port, and connected the storage e0M port with a network cable. I tried to log in to the centralized management IP/spi to obtain autosupport logs, but I found that I could not ping through the management IP address of the storage end. The computer firewall is also turned off (Because in other places my computer is able to connect to storage and access graphics pages) Is there any restriction made by the storage to deny my access?
... View more
Quick question, we have noticed the NS224 shelf IDs on the cluster have not been set to those in the design doc. While I know it will require the controllers to be reset ( they are base configured with only e0M and root aggs ) can someone advise the order of steps to reset the system and adjust the shelf ID ( basically take the controller back to having come out the box ). Thanks
... View more
Hi We have a followig configuration: AFF250 with 10 disks of 13,97TB. ADPv2 is in place. 2 data aggregates of 9 partitions each 6,94 TiB in size. We've just added 8 disks which appear as spares, not partitioned. Tryig to expand the aggregate via GUI (ONTAP 9.10) I get the following estimation message: Adding drives to local tier "aggr02" will increase its capacity by approximately 25 TiB I wonder how is it going to expand the aggregate? I would expect 8 partitions of 6,94 TiB added to the existing raid group what would result in 8x6,94TiB Can I do it manually via command line? Have not found any documentation other than Add capacity to a local tier (add disks to an aggregate) (netapp.com) but it is not detailed enough. Thanks in advance for your advices.
... View more