Thanks!
I've passed your suggestion on to the folks in NYC who take care of that
particular cabinet. I'll wait and see if they check that.
Thanks again...
--
Richard D. McClary
Jr Infrastructure Architect, Information Technology Group
ASPCA®
1717 S. Philo Rd, Ste 36
Urbana, IL 61802
RichardMcClary@aspca.org
P: 217-337-9761
C: 217-417-1182
F: 217-337-9761
www.aspca.org
The information contained in this e-mail, and any attachments hereto, is
from The American Society for the Prevention of Cruelty to Animals® (ASPCA
®) and is intended only for use by the addressee(s) named herein and may
contain legally privileged and/or confidential information. If you are not
the intended recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying or use of the contents of this
e-mail, and any attachments hereto, is strictly prohibited. If you have
received this e-mail in error, please immediately notify me by reply email
and permanently delete the original and any copy of this e-mail and any
printout thereof.
BrendonHiggins <xdl-communities@communities.netapp.com>
06/21/2011 11:05 AM
Please respond to
jive-32153356-1org-2-17ua@netapp-community.hosted.jivesoftware.com
To
Richard McClary <richardmcclary@aspca.org>
Press this button if the "To" is a fax number. Enter in the fax number
like 123-456-7890.
cc
Subject
""DFS Active" - yes vs no" [NetApp Community > Products & Solutions > File
Services]
Re: "DFS Active" - yes vs no
created by BrendonHiggins in File Services - View the full discussion
The answer to my problem was to turn on SMB2 on the filer.
options cifs.smb2.enable on
Hope it helps
Bren
of replies to the post:
Discussion thread has 2 replies. Click here to read all the replies.
Original Post:
Greetings! This is probably basic stuff. However, I had no OnTap
training and no experience with DFS systems... We have two main offices.
The NetApp FAS cabinets are in the New York office, and many of us needing
access are in the mid-west office (central Illinois, USA). Our network is
Microsoft Windows 2003 (Native) Active Directory. I am not sure as to the
OnTap version, but I believe it is 7.3. Client machines are mostly
Windows XP SP3, Professional. However, we see the same problem from other
Windows 2003 servers... When we in Illinois attempt to connect to the
departmental drive through its DFS address, we receive the following:
+
aspca.local\nyc\Info Technology is not accessible. You might not have
permission to use this network resource.+ +Contact the administrator of
this server to find out if you have access permissions.+ +The network path
was not found.+ We get this response regardless of whether we try to
access with least privileged user credentials or with domain administrator
credentials. If we simply enter the address "
aspca.local\nyc", we see
numerous folders (including Info Technology). With two exceptions, we
receive the same message if we click on the folders. If instead of
entering the DFS address and instead enter the fully qualified domain name
(FQDN) of the NetApp filer and the folder name, we gain access to the
folder with the appropriate read/write/modify rights. Being curious, I
went back to the DFS address (in Windows Explorer,
aspca.local\nyc) and
began right-clicking on folders to check "Properties". I saw a tab
"DFS". For the two folders to which we do have access, the DFS tab said
"Active: Yes". For our departmental folder, the DFS tab said "Active:
No". In that tab was a button to set DFS to "Active: Yes". I told this to
the administrator in New York. I was told the following (probably as a
learning experience?): I was told that the department members in the New
York office did not see the same errors we were seeing. I was also told
there was the possibility of the system access "breaking" for the New York
department members should I click this button. Finally, I was told to
come to this forum and ask... 1. Is the lack of access to a folder via the
DFS address by people at the remote location due to the DFS Active setting
set to "No"? 2. What else could be causing the lack of access via this
address? (Again, access via FQDN name is successful.) 3. What may or may
not happen should I or someone else click the "Set to active" button in
the "Properties - DFS" tab? Thanks...
Reply to this message by replying to this email -or- go to the message on
NetApp Community
Start a new discussion in File Services by email or at NetApp Community
Stay Connected:
Facebook
Twitter
LinkedIn
YouTube
Community
© 2011 NetApp | Privacy Policy | Unsubscribe | Contact Us
495 E. Java Drive, Sunnyvale, CA 94089 USA