CIFS LIF IP not reachable on when hosted on port Type VLAN

[SKT]

CIFS LIF IP not reachable on when hosted on port Type VLAN ( a0a-200, a0a-150 etc..)

But works fine moved to port type if-grp (a0a) 

any further configuration needed on NetApp end?

We are using Cisco switches for the data 10Gbps connectivity.

We have both singlemode and multimode_lacp policies for two different clusters for ifgrp ;

but same errors on both setup.

[liu · Accepted solution]

Set the Native VLAN on the switches back to the default (VLAN1)

ONTAP 9 LIF configured for a VLAN is unreachable when native VLAN is present - NetApp Knowledge Base

Check the operation configuration and startup configuration of the cisco switch

How to check differences between running and startup config of a Cisco cluster switch - NetApp Knowledge Base

[SKT]

After moving to trunk (mode active) from access mode on the Cisco switch side fixed the issue.