Please find below printers by category and eSF version ... here is what we have test and is working in CDOT

Lexmark issue
In Clustered Data ONTAP “NetApp” 8.2 and 8.3” does not handle authenticator with checksum type RSA_MD5
The Kerberos 5 version 1.6 library used in the SVM only supports checksum type 0x8003. However, other implementations like Samba,
support checksum type RSA_MD5. When the SVM encounters the RSA_MD5 checksum in the authenticator during the session setup AndX request,
it fails the authentication, rendering the client unable to access the file systems in the SVM. The Lexmark MFP fails to scan because
it uses checksum type RSA_MD5 in the session setup AndX request.
Lexmark has provide a fix, see below firmware versions that they working in CDOT.
Printer LEXMARK X792
WS-SCAN v3.3.1
Scan to Network v4.5.14
Engine ID = 50
Loader = LHS41.MR.P449-0
Kernel = FHN.HS41.F449-0
Base = LHS41.MR.P449-0
AIO = LHS41.MR.P449-0
Fax = LHS41.MR.P449-0
Network = NH.HS41.N449-0
Network Drvr = LHS41.MR.P449-0
Video = 9.0
UICC = v5.60
Engine = LHSX.HC.E157-0
Panel = v5.60
Green Micro = Boot_v01.21-App_v03.10
Printhead = LSU.as.H000.00
Transfer Module = 1.1
Font = 8.11H01-U5.021
ES = LHS41.MR.P449-0
Printer LEXMARK X711
Scan to Network v4.8.8
Framework version v4.4.4
Engine ID = 70
Fuser Type = 01
Loader = LW62.TU.P676-0
Kernel = FW62.TU.F676-0
Base = LW62.TU.P676-0
AIO = LW62.TU.P676-0
Fax = LW62.TU.P676-0
Network = NH62.TU.N676-0
Network Drvr = LW62.TU.P676-0
Engine = FDN.TU.E715-0
Panel = v4.1e8.0hw12c5t
Green Micro = Boot_v00.00-App_v01.12
Font = 8.11H01-U5.021
ES = LW62.TU.P676-0
WebClient = FWB.111016.2106-010000
Crypto Module = 2.10
Scanner = LW62.TU.P676