As per decommission process, data aggregate was offline and destroyed issuing the offline and destroy commands.
After a while, due some data retrieval needed, is requested to try to recover,
While issuing the undestroy command:
CLU-CRS::*> aggr undestroy aggr1
"storage aggregate undestroy" is not supported.
As per seen in kb, this is a 7-mode command not matching with anyone in Cluster Mode.
Question is simple: Is there anyway to recover the data?
The disks are unzeroed:
CLU-CRS::*> storage aggregate show-spare-disks
Original Owner: CLU-CRS-01
Pool0
Partitioned Spares
Local Local
Data Root Physical
Disk Type RPM Checksum Usable Usable Size Status
--------------------------- ----- ------ -------------- -------- -------- -------- --------
1.0.0 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.1 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.2 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.3 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.4 SAS 10000 block 971.9GB 0B 1.09TB zeroed
1.0.5 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.6 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.7 SAS 10000 block 971.9GB 143.7GB 1.09TB not zeroed
1.0.8 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.9 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.10 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
1.0.11 SAS 10000 block 971.9GB 0B 1.09TB not zeroed
If trying to create new aggregate , the system is warning about if done, the disks will be zeroed before to be added
Any hint?