Talk with fellow users about the multiple protocols supported by NetApp unified storage including SAN, NAS, CIFS/SMB, NFS, iSCSI, S3 Object, Fibre-Channel, NVMe, and FPolicy.
Talk with fellow users about the multiple protocols supported by NetApp unified storage including SAN, NAS, CIFS/SMB, NFS, iSCSI, S3 Object, Fibre-Channel, NVMe, and FPolicy.
Dear all, I am new to NetApp storage environment, i did not find any proper procedure or instructions to find VMs belongs to VMware or Hyper-V connected to which LUN, In system manager when I select my desired LUN to find which VMs connected to this LUN i can see three initiator groups and 17 initiators. people are saying we can find connected VMs through these igroups but i have no clue kindly guide me to find vms. my netapp version is 9.1p3. nivas
... View more
Hello Folks, I am not able to access Not able to access \\filler\etc$\log\retransmit. getting error code 0x80004005. Since I am not receiving autosupport over the email. I need to get it manuall. filler IP is reachable and access through SSH. even able to access though system manager. Any help would be appreciated. Thanks, Aniruddh
... View more
Hi, on a linux client i see only the root when i enter: root@srv20:~# showmount -e 192.168.99.12 Export list for 192.168.99.12: / (everyone) root@srv20:~# I don't find if there is something wrong: main::> vserver nfs show -vserver main-file -fields showmount-rootonly,showmount vserver showmount showmount-rootonly --------- --------- ------------------ main-file enabled disabled main::> So i entered: main::> vserver nfs modify -vserver main-file -showmount-rootonly enabled -showmount disabled No change on the inux client, but this was expected... So i entered: vserver nfs modify -vserver main-file -showmount-rootonly disabled -showmount enabled Same setting as inital: main::> vserver nfs show -vserver main-file -fields showmount-rootonly,showmount vserver showmount showmount-rootonly --------- --------- ------------------ main-file enabled disabled main::> But on the linux host i see now: root@srv20:~# showmount -e 192.168.99.12 Export list for 192.168.99.12: /daten (everyone) /daten/install (everyone) /daten/temp (everyone) /daten/users (everyone) /recordings (everyone) / (everyone) root@srv20:~# So changing the setting one time to the other setting and then back resolves the problem. I was using SVM DR here and had the backup destination active for a few days, then i reinstalled the source and made a new SVM DR with the reinstalled source. After all was in sync i enabled the original source again and made a reverse sync. During this actions this seetings seems to got an inconsistent state... Just for info, if someone has the same problems, that an showmount isn't workung but all is correct configured.
... View more
Opening projects shared via NetApp CIFS in VSCode or Visual Studio is very slow, but opening projects shared via Synology CIFS is quite normal. What settings should be adjusted? Thanks
... View more
Hi, I have FAS2820 and i am deploying it. While creating the cifs server i am getting below error. Enter the user name: sagar.mandlik Enter the password: Error: Machine account creation procedure failed [ 49] Loaded the preliminary configuration. [ 54] Successfully connected to ip 172.24.1.29, port 88 using TCP [ 87] Successfully connected to ip 172.24.1.29, port 389 using TCP **[ 10101] FAILURE: Could not create account ** 'cn=NYKSTR,CN=Computers,dc=NYKAA,dc=LOCAL': Timed out Error: command failed: Failed to create the Active Directory machine account "NYKSTR". Reason: LDAP Error: The search was timed out. Can anybody please help me here
... View more