Network and Storage Protocols
Network and Storage Protocols
Hi All
IHAC who has upgraded Data Ontap from 7.3.1 to 7.3.2 on a cluster.
During the process there were Shelf Module errors.
Customer wants to know what are these errors related to. Can anyone comment on these errors?
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/2c disk shelf ID 1.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/2c disk shelf ID 4.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/1b disk shelf ID 1.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/2c disk shelf ID 5.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/1b disk shelf ID 5.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/2c disk shelf ID 3.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/1b disk shelf ID 6.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/1b disk shelf ID 4.
[shelf.module.configuration.failure:error]: ERROR--Could not complete the configuration of disk shelf module A on channels PARTNER/1b disk shelf ID 2.
Any comment will be really appreciated
I just performed a cf takeover, and on the console of the partner (non active), I see the following:
Anyone know what this means?
Can you verify that there are no fault lights on any of the shelf modules? If there are you can try reseating the module. Otherwise you may need to call into support to have the module replaced. It basically means it can't perform the module firmware update after the ONTAP upgrade since the shelf has no other working module to fall back on.
Is there a way of checking for fault lights remotely?
I am not near the gear. From Filer View, I see the happy green ball that says "The system's global status is normal."
Hi,
I would need the serial number to access any autosupports your filer may have sent up to trouble shoot the shelf modules.
Thanks,
Doug
Never noticed before, but you may be right about the shelf not upgrading:
Shelf 1: ESH4 Firmware rev. ESH A: 13 ESH B: 13
Shelf 2: ESH4 Firmware rev. ESH A: 13 ESH B: 13
Shelf 3: ESH4 Firmware rev. ESH A: 14 ESH B: 14
Shelf 4: ESH4 Firmware rev. ESH A: 14 ESH B: 14
What is the output of the following command:
storage download shelf
storage shelf download
Actually I was behind, I updated it:
na2*> storage download shelf
[storage download shelf]: No shelves eligible for update
I guess I could try to do a cf failover again and see if it tosses those errors.
Please do, let me know if you need anything else I'll be online for 30 more minutes.