Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have a FAS2750 with DS2246 shelves. We had a disk fail the other day and i`ve purchased some 2nd hand disks from a reputable reseller. I`ve contacted NetApps but they no longer stock the disks for this system.
When i plug the disks in i get a bad label message and the disk doesn`t show as a spare. If i run these commands will it solve this issue?
set -privilege advanced
storage disk unfail -s 1.1.7
storage aggr status -s
storage disk zerospares -owner node-1-cluster-1-gb-cam-1
I`ve never done this before so don`t want to wipe the rest of the disks.
Many thanks
Solved! See The Solution
1 ACCEPTED SOLUTION
prachana has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Bad label is a known issue with 2nd hand disks.
To recover:
set adv
disk unfail -disk 1.1.7 -spare true
disk show -spare
You will not wipe the rest of the disk, it will only perform a zeroing on not zeroed disk
disk zerospares
2 REPLIES 2
prachana has accepted the solution
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Bad label is a known issue with 2nd hand disks.
To recover:
set adv
disk unfail -disk 1.1.7 -spare true
disk show -spare
You will not wipe the rest of the disk, it will only perform a zeroing on not zeroed disk
disk zerospares
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for the reply. Glad to see i had the correct commands. I wanted to double check before i did this incase i ended up wiping our system.
