Breath Life Into FAS3020

[sunking]

Good evening,

I have been tasked with getting an old decommissioned FAS3020 stood back up and running. We would like to factory reset it and basically start over with the array. I have been looking for documentation on the FAS3020 and I cannot seem to find anything. Can anyone point me to the FAS3020 documentation or provide some hints in how I would be proceed in this task.

Thank you all in advance...

[Flane_Schlueter]

Hi,

connect with a serial cable to the filer,

power on the system

when ONTAP is booting "press ctrl + c"

now you come in the Mainanance Mode

=========


(1) Normal boot.


(2) Boot without /etc/rc.


(3) Change password.


(4) Initialize all disks.


(4a) Same as option 4, but create a flexible root volume.


(5) Maintenance mode boot.



Selection (1-5)? 4

press option 4!

follow instructions

i meen  Y, Y

an you became many points on your display.

initialize all disk is finished the FAS running in the setup.

have fun

Dirk

[sunking]

Thanks Dirk!!! I appreicate the response. Is there a link to documentation for the 3020? Not seeming to find anything...

[andris]

FAS3020 support ended about 4-1/2 years ago.

You might be able to find guides on the Internet - try searching for "FAS3000 series".

We still have the installation and setup guide posted:

https://library.netapp.com/ecm/ecm_get_file/ECMM1280261

The ONTAP 7.3 Documentation Roadmap can help you with documentation titles that you might want to find...

https://library.netapp.com/ecm/ecm_get_file/ECMM1278403

ONTAP 7.3.7P1 would be the last valid release for you to run. There is some archived documentation available:

7.3.7 (NetApp Storage Systems)

All documents   Release Notes ( HTML , Acrobat )