FAS2750 Test Setup

Neoranov · ‎2020-09-01

Hi

I have a FAS2750 (Unified Configuration), a DS224C Shelf and a Dell Server with 4 10G SFPs and a SAS Card. And all the Cables.

I need to Set this Up just for testing purposes.

Can anyone help me?

I connected it all together like described here (Switchless Cluster):

Do I need the "Data Network Switch"? I have none...

How do I connect this to the Dell Server? Can I connect it per SAS Cable?

SpindleNinja · ‎2020-09-01

You can go direct from FAS to Host(s) using iSCSI.

Each host would get connected into each controller. You can have a max of 4 hosts connected without a switch.