Failing PSUs in FAS2040

[ETB]

Hi all,

We have moved hardware from our Netherlands to Scotland site.  All equipment was working in NL and was powered down correctly and professionally transported.

Included in the move are 6x FAS2040.  So far all PSUs from 3 have blown on power up.

Any ideas?

Power Supplys fitted are CP-1103R2

[hariprak]

Hi,

Ensure that there is adequate power to the storage shelves. Refer to the Disk Shelf Installation and Service Guide for Power Supply requirements.

You can also refer to the below link which talks about Power supply issues.

https://kb.netapp.com/support/index?page=content&id=3013824#Anchor1

Thanks

[hariprak]

Hi,

Ensure that there is adequate power to the storage shelves. Refer to the Disk Shelf Installation and Service Guide for Power Supply requirements.

You can also refer to the below link which talks about Power supply issues.

https://kb.netapp.com/support/index?page=content&id=3013824#Anchor1

Thanks