We've a FAS2020 used for years.
But now a question arise - is it possible to login to bmc via ssh?
bmc status tells me next:
Baseboard Management Controller:
Firmware Version: 1.3
IPMI version: 2.0
BMC MAC address: 00:a0:98:25:62:1a
IP address: 10.10.13.21
IP mask: 255.255.255.0
Gateway IP address: 10.10.13.254
BMC ARP interval: 10 seconds
BMC has (1) user: naroot
When I want to login via ssh i got:
Received disconnect from 10.10.13.21: 11: Logged out.
Disconnected from 10.10.13.21
Yes to ssh. bmc reboot and it likely will work. Or bmc setup and reset it again.
I've found that the deal is in ssh cllient.
Tries to login from Mac or Linux still without luck, but login from PuTTY (winapp) - is ok!
Suppose this is kind of incompatibility between ssh-keys or setup of ssh daemon "Mocana" in bmc.
$ telnet 10.10.13.21 22
Connected to 10.10.13.21.
Escape character is '^]'.
Will try to discover more...
From a MAC try:
ssh naroot@##.##.##.## -c aes128-cbc
You have to change the MAC client default cipher to work with a BMC
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
The Insights to Actions Community is back with a new look! Click here to learn how to get started.
Join our Discord Community