i have a problem with newly created Snapvaults and i have no idea how to fix this.
The Source-Volume is on a Metrocluster and had a Snapvault before, but was removed properly.
The Destination-Volume is a new Volume on a FAS2620 Cluster.
Both Systems are running ONTAP 9.1 (9.1P10 on the Metrocluster and 9.1P3 on the FAS2620)
After i created and initialized the Snapmirror with the type XDP, it is in the State Broken-off.
I check the Peer Status and this is fine, other Snapmirror/Snapvault are working fine.
Since i have no idea where to look at, just tell me what information you need to help me fixing this.
Thanks in advance.
See The Solution
Did the initialization complete successfully ? What is the output of the below command, please have this executed from the destination (FAS2620) cluster.
Destination_cluster::>snapmirror show -destination path <DES_SVM_NAME: VOL_NAME_DES> -instance (This would be a long detailed output )
example:my_cluster::> snapmirror show -destination-path SVM1:vol_dr -instance
View solution in original post
thanks for the Reply!
I have fixed this today morning as I saw that the Volumes on the Destination were created as RW, and not as DP.
After i re-created the Volumes as DP, everything works fine.
Join our Discord Community