Unable to SSH while telnet.enable is off

[tatlee]

Filer setting as below:

asihkgfp00n1> options ssh
ssh.access                   *
ssh.enable                   on
ssh.idle.timeout             0
ssh.passwd_auth.enable       on
ssh.port                     22
ssh.pubkey_auth.enable       on
ssh1.enable                  off
ssh2.enable                  on
asihkgfp00n1> options telnet
telnet.access                legacy     (same value required in local+partner)
telnet.distinct.enable       off        (same value required in local+partner)
telnet.enable                on         (same value required in local+partner)

Once telnet.enable is turned off, ssh failed accordingly. Anybody knows why?

The filer is FAS3140, ONTAP 7.3.1P2.

Regards,

Terrence

[bjornkoopmans · Accepted solution]

Hi, I had the exact same thing. It is described in BUG ID 344484.

However this should be fixed in 7.3.1.1P2 (it did for me anyway).

Bjorn

[danielmorgenstern]

Yes, this is apparently a known issue and we ran into it as well.

Prior to being able to schedule an upgrade to a fixed version, I worked around this by leaving telnet enabled but denying access via telnet to all hosts:

filer> options telnet.access "host=-"

Hope that is useful.

[tatlee]

Thanks!

Regards,

Terrence Lee

NetApp Global Services

NetApp

852.3605.7700 Main

852.9181.8824 Mobile Phone

terrence.lee@netapp.com

Learn how: netapp.com/guarantee