Talk and ask questions about NetApp FAS and AFF series unified storage systems. Talk with other members how to optimize these powerful data storage systems.
Talk and ask questions about NetApp FAS and AFF series unified storage systems. Talk with other members how to optimize these powerful data storage systems.
hello, I’ｍ planning to build fas2750(Ontap v9.xx). It has raid-db configuration environment([data disk x9, parity x2, spare x1] x2 node ) . Question 1: If two disks fail on one node (= 1 raid group), will two spare disks be used? Question 2: The Ontap 8 manual states that if there are no spare disks and two disks fail, the node will be shut down within 24 hours (default) automatically. Does Ontap9 behave in the same way? Thanks
... View more
I would like to ask whether this mixed stack refers to: one shelf has HDD and SSD, or one shelf has HDD and the other shelf has SSD connected to the controller. I have a shelf with SAS hard disks and SSDS, and I need to increase space to add a new shelf. Using NL-SAS hard disks, I can directly pull out the SAS cable of the shelf with SAS hard disks and SSDS, connect it to the new shelf and access the original loop. You still need to add a new loop to connect to the newly added shelf
... View more
Hello Experts; Hope you are all well and in good health? I have a few questions i kindly request for your expertises. Qns 1: When assigning ownership to Disk of DS212C of 4TB only 8disks are assigned 4 disk become shared and I can't use them for creation of aggregates Qns 2: Is there a way of forcing these 4 disks to be owned by single controller so that I can use them. Kindly assist me with solutions to these challenges. Thanks alot for your help
... View more
We have FAS2552 which is having 1Gig port physically... now we are planning to upgrade the port from 1 gig to 10 gig...so what are the step that we need to follow? or how can we do it?
... View more
