Options
- Mark all as New
- Mark all as Read
- Float this item to the top
- Subscribe
- Bookmark
- Subscribe to RSS Feed
- Threaded format
- Linear Format
- Sort by Topic Start Date
Board Activity
Hi All, I just deploy a AFF C250 for the SAN purpose on one of my custom. But I need some technical advise or view on my current setup as after I setup the bos and present the iSCSI and do the failover testing after the iSCSI LUN already present in the VM, the LUN is missing on the server. Here my current NetApp C250 setup and current physical connection. Here is some summary of C250 configuration and also current environment overview. Customer network overview and connection Management and ISCSI LIF is in the same network segment NetApp C250 node is connected to Cisco C9300 switch - for management (e0M) and iscsi LIF (e0a) Both Cisco C9300 have uplink to the same production core switch The VM which the iSCSI LUN mapped is one VM inside the Nutanix AHV Failover Testing observation Before failover testing by shutdown the node A View in the NetApp System Manager Current iSCSI LUN/Volume is located on aggr1 in Node A and the LUN is online (from the view in in NetApp System Manager View in the VM (the location iSCSI Mapped) The iSCSI LUN is presented in the servers After failover testing by shutdown the node A View in the NetApp System Manager Current iSCSI LUN/Volume is located on aggr1 in Node A and the LUN is online (from the view in in NetApp System Manager View in the VM (the location iSCSI Mapped) The iSCSI LUN is presented in the servers is missing Based on my current setup and connection and testing, why the LUN mapped in the server is missing although when check in the NetApp System Manager, the volume and LUN is online able to failover without any issue? I might need the view and advise on the physical connectivity between the NetApp C250 and the Cisco switch that might be the real cause of the LUN missing due the redundancy setup. Appreciate any view on this matter. Thanks Regards, Zul
... View more
By ZulhadiOccasional ContributorONTAP Hardware
3 hours ago
View By:
- View By:
- FAILOVER
61 Views
0
2
Hi, How i can get shipping dimensions and weight for FAS 2720 , device dimensions and weight not acceptable for logistics agencies is there any reference i can use to find any NetApp shipping boxes dimensions Thanks in advance
... View more
By mutaz_alasrawiContributorONTAP Hardware2021-01-2802:07 AM
View By:
- View By:
- FAS
2,262 Views
0
2
Hi all, A customer has an AF200 system wich is near of end of support and we are evaluating if we can maintain this system by ourselves. The most complicated situation I see is if one of the controllers fails and we have to replace it. As I know without support we can't generate replacement licenses if we buy a refurbished controller but what about if that controller comes with its licenses, ¿It could work? Thanks in advance
... View more
By jtejadaOccasional ContributorONTAP Hardware2024-12-1107:33 AM
277 Views
0
2
I am rebuilding FAS 2660. after recabling the ports are not coming up. DC ops confirmed the connections are in place and network team has enabled ports from their side. need some one help on this .
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0c Default - down 1500 auto/auto -
e0d Default - down 1500 auto/auto -
e0e Default - down 1500 auto/auto -
e0f Default - down 1500 auto/auto -
... View more
By lucifer6ContributorONTAP Hardware2020-05-2111:31 AM
6,375 Views
0
7
Hello. I new in this forum, and i'm french so my english is not very well. I buy a FAS2520 on ebay, and i want to use it. In the different tuto i read, for configure it, the software Netapp System Setup 3.1 is required. My profile don't permit me to download this software on the Netapp site, because, i have the "guest" profile. So can't anyone to send me the software ? Good 2025 for all !!
... View more
By GouznioufContributorONTAP Hardware
2 weeks ago
280 Views
0
2