Dear Everyone, After upgrading the FAS8200 platform to ONTAP 9.12.1, the output time of the sensors show command has increased from the previous 2 seconds to about 4 seconds. Using the hidden option, we confirmed that there are some differences in the "init sensors" section. Although the number of sensor items is the same between ONTAP 9.9 and 9.12.1, the customer is concerned about what internal logic changes may have caused the additional 2-second delay. While we believe this behavior is normal, we need to provide the customer with a clear explanation of the underlying reason. For comparison with other platforms: FAS8300: 328 sensors → output within 1 second AFF A700s: 430 sensors → output within 1 second I would appreciate any advice you can provide regarding this issue. ... View more

Hi All,    I have a four node cluster with 4x10G Ports each on both AFF C400 and FAS8300 with two 10G switches. My query is what should be the topology for achieving highest bandwidth and redundancy for NAS.   Should I connect, two ports from each node to switch one and another two to switch two and create a interface group using all the four.   Thanks in advance.   Regards, Praveen. ... View more

Hi Techies, We are planning to copy our NetApp cluster configuration backups to http we server. But, I am getting below error   405 method not allowed     Please, help me with this configuration. ... View more

We are currently utilizing the NetApp FAS8300 storage system, configured with FSAS (Fat SAS) disk type operating at 7200 RPM. We want to know the  whats IOPS support for this Model ! ... View more