ONTAP Hardware - Page 36

arsalankhan · ‎2018-04-17

Hi Team, Need quick help if someone can on below: It was two node metrocluster but due to business requirement we configured it as a single node (non-ha) system. Model: FAS8040. It was running fine with one node configuration since more then couple of years. Today we did an upgrade from 8.3.1P1 to 9.1P10. As soon as we reboot the node. It is continually giving us below error and not booting ONTAP. [rscnas01:fci.adapter.error:notice]: Fibre Channel adapter driver encountered error "disabling non-NetApp 8324 hardware" on 1a [rscnas01:fci.adapter.error:notice]: Fibre Channel adapter driver encountered error "disabling non-NetApp 8324 hardware" on 1b [rscnas01:kern.version.change:notice]: Data ONTAP kernel version changed from 8.3.1P1 to 9.1P10 CRITICAL: Metrocluster is configured but HAOSC is not configured correctly. Use the maintenance mode command "ha-config modify" on this node to correct the problem. This node cannot continue to boot and will now halt. We verified ha-config show setting for both controller and chassis. Both are already set to "non-ha" We also tried after removing the FCVI adapter hardware but its still giving us same above error. Really appreciate Urgent help here. Arsalan

sandeepthots

Hi Team, We have recently responded to a banking customer for their RFP and they have reverted with queries as below Proposed Solution - AFF A800 with 15.3TB NVMe SSD [ 48 x 15.3TB for DC and 24 x 15.3TB for DR ] 32Gbps FC ports Queries 1. Maximum time taken by the storage to resume operations in terms of Failover ? Any Test results will help 2. During the failover period , will the requests coming in from Hosts be Queued ? 3. What is the recommended practice to configure Multipathing at VM 's level ? 4. Do we have any performance numbers at various Cached Hit and Cache Miss levels ?

Ebo_Hagan

Hi All, we recently acquire FAS8700 HA system. The network we have is 1GB and 10GB. The onboard ethernet ports are 25GbE/100GbE (ROCE). Can I install either a 1GB or 10GB SFPs into the onboard ethernet ports and configure for snapmirror?? Thank you in advance. Regards

vishwand

team, i am looking for some tips to find SFP details(vendor, partnumber,serialnumber ) using powershell. any tips or ideas

Terry_Lui · ‎2021-09-15

PSU1 FRU is not present in the chassis alert message was show on node A. I tried unplug and plug again the PSU, but alert still here. SP was tried reboot before, may i know what is the next step i can do. Many thanks. logging as below: ----------------------------------------------------------- WXXXXXXXXXX::> system health alert show Node: WXXXXXXXXX-B Resource: PSU1 FRU#042012002634 Severity: Critical Indication Time: Mon Sep 06 07:02:21 2021 Suppress: false Acknowledge: false Probable Cause: PSU1 FRU is not present in the chassis 042012002634. The nodes in this chassis are WXXXXXXXXX-A. Possible Effect: The nodes in the chassis might not function effectively or redundancy might be lost. Corrective Actions: 1. Plug in PSU1 FRU correctly into the slot. 2. Refer to the Hardware specification guide for more information on the position of the field-replaceable unit (FRU) and ways to check or replace it. 3. Contact support personnel if the alert persists. ------------------------------------------------------------------------------------------------------- event show: monitor.fan.failed: Multiple fans has failed. monitor.fru.info.unreadable: The inventory information of FRU PSU2 is not readable. monitor.fru.info.unreadable: The inventory information of FRU PSU1 is not readable. callhome.c.fan.fru.fault: Call home for CHASSIS FAN FRU FAILED: Multiple fans have failed monitor.temp.unreadable: The controller temperature (Midplane 1 Temp) is not readable. monitor.temp.unreadable: The controller temperature (Midplane 2 Temp) is not readable. monitor.temp.unreadable: The controller temperature (Midplane 3 Temp) is not readable. monitor.temp.unreadable: The controller temperature (Midplane 4 Temp) is not readable. monitor.fan.failed: Multiple fans has failed. monitor.fan.failed: Multiple fans has failed. monitor.fan.failed: Multiple fans has failed. monitor.fan.failed: Multiple fans has failed.

Board Activity

Node rebooting after upgrade

AFF A800 - Failover

Supported SFP for FAS8700

Get SFP specific details using powershell

FAS2750 node A / system alert PSU1 FRU is not present in the chassis

INSIGHT 2021 Digital: Meet the Specialists 2

We're on Discord, are you?

Meet Explore, NetApp’s digital sales platform