Hello,
As I am using discussions for the first time, I hope my question will end up in the right part of it.
I'm having some issues with FAS2050 and I wonder if anyone could give me some directions/answers/ideas on what might be the problem. A critical status on my shelf is saying 'ES Electronics' and to be honest, I'm not sure what does it all mean? It's obvious to me that one temperature sensor is dead:
Temperature Sensor installed element list: 1, 2, 3; with error: 3
Shelf temperatures by element:
[1] 17 C (62 F) (ambient) Normal temperature range
[2] 34 C (93 F) Normal temperature range
[3] Unavailable
Temperature thresholds by element:
[1] High critical: 50 C (122 F); high warning 40 C (104 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
[2] High critical: 63 C (145 F); high warning 53 C (127 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
[3] High critical: 63 C (145 F); high warning 53 C (127 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
ES Electronics installed element list: 1, 2; with error: 2
ES Electronics reporting element: 1
ES Electronics information by element:
[1] Serial number: IMS82899002B248
CPLD version: <N/A>
[2] Serial number: IMS82899002AF97
CPLD version: <N/A>
and here's the full error output if it means anything:
Environment for channel 0a
Number of shelves monitored: 1 enabled: yes
Environmental failure on shelves on this channel? yes
Channel: 0a
Shelf: 1
SES device path: local access: 0a.14
Module type: AT-FCX; monitoring is active
Shelf status: non-critical condition
SES Configuration, via loop id 14 in shelf 1:
logical identifier=0x50050cc0021bd9cc
vendor identification=XYRATEX
product identification=DS14-Mk2-AT
product revision level=3535
Vendor-specific information:
Product Serial Number: OPS8248721BD9CC
Optional Settings: 0x00
Status reads attempted: 2182673; failed: 0
Control writes attempted: 82; failed: 0
Shelf bays with disk devices installed:
13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
with error: none
Power Supply installed element list: 1, 2; with error: none
Power Supply information by element:
[1] Serial number: PMC643620382362
Type: <N/A>
Firmware version: <N/A>
[2] Serial number: PMC643620382353
Type: <N/A>
Firmware version: <N/A>
Cooling Unit installed element list: 1, 2; with error: none
Temperature Sensor installed element list: 1, 2, 3; with error: 3
Shelf temperatures by element:
[1] 17 C (62 F) (ambient) Normal temperature range
[2] 34 C (93 F) Normal temperature range
[3] Unavailable
Temperature thresholds by element:
[1] High critical: 50 C (122 F); high warning 40 C (104 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
[2] High critical: 63 C (145 F); high warning 53 C (127 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
[3] High critical: 63 C (145 F); high warning 53 C (127 F)
Low critical: 0C (32 F); low warning 10 C (50 F)
ES Electronics installed element list: 1, 2; with error: 2
ES Electronics reporting element: 1
ES Electronics information by element:
[1] Serial number: IMS82899002B248
CPLD version: <N/A>
[2] Serial number: IMS82899002AF97
CPLD version: <N/A>
Shelf mapping (shelf-assigned addresses) for channel 0a:
Shelf 1: 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Does anyone has an idea on what is going on? What does 'ES Electronics' stands for? Is it really critical? I can live without one temp sensor, but I wonder if anything else might be malfunctioning or what part I need to order with NetApp? Will full power cycle do the thing here?
Thank you in advance!
