Topics with Label: aggregates

About FAS and V-Series Storage Systems Discussions
Talk and ask questions about NetApp FAS series unified storage systems and V-Series storage virtualization controllers. Discuss with other members how to optimize these powerful data storage systems.

View By
Sort By Subscribe
Hi Ladies and Gentlemen, I have a CIFS share that I started using for my backups. I noticed that one of my backups was eating up all the storage in th ...read more
I have a FAS8200 HA system. One of the two stacks has only one DS224C (1.8TB * 24) disk shelf in the stack.  Can I add DS2246 (1.2TB *24) shelves to t ...read more
I have both the Activity and Attention LED's off in one of the disks - NetApp DS212C disk shelf (FAS2520). The disk is NetApp 108-00270+B0 - 2TB 7.2K ...read more
I am rebuilding FAS 2660. after recabling the ports are not coming up. DC ops confirmed the connections are in place and network team has enabled port ...read more
We have AFF220. There is an SVM with a few CIFS share volumes in it.  One volume is called USERS and shared as USERS$. We were able to access the shar ...read more
We are seeing lots of performance issue from one week especially read latency on filers and one of the volume. Volume size is approx 9TB and many appl ...read more
From time to time I have very high peaks of write as well as reads latenvy. FAS3250 8.1.4P7   I cannot correlate it to anything. Here is some data fro ...read more
Anyone know how to view open sessions on a 7-Mode Ontap 8 then close all the sessions?   I see documented "cifs sessions" but I dont see any commands ...read more
I'm in the process of upgrading my two-node cluster, running ONTAP 9.6P5. I'm doing this by adding another two nodes to it, moving all the data and LI ...read more
Im rather new to Netapp, is there a way (Other than ROBOCOPY) to move data from a FAS3240 OnTap 8.2.4P4 7-MODE to a new  Netapp FAS2720 running Ontap ...read more
Try the NEW Knowledgebase!
NetApp KB Site
Forums