If the relationships were reaped (or deleted) as would be expected after a dataset destroy operation then they must be rebaselined.  Importing them into a new dataset only will work if the relationships were not reaped, and even then the ability for UM to grow the secondary location would be lost. Assuming that the dataset was restored using the database backup (all or nothing restore - all data collected or generated after the backup creation would be lost in the restore), the relationships would still need to be recreated on the controller side.  Thanks, Kevin ... View more

Hi Rick, You need to restore the database to a running instance of UM on the new server - it is not clear from your steps if that was attempted.  Your first attempt was not a valid upgrade path, although it might have worked had all the paths and UM version been the same between the servers. Thanks, Kevin ... View more

Hi, I might be missing the point of the question, but have you already attempted to use the CLI? dfpm dataset relinquish { [ <destination-volume-name-or-id> ] | [ <destination-qtree-name-or-id> ] } Thanks, Kevin ... View more

Hi Sunil, Are you using System Manager or System Setup? Thanks, Kevin ... View more

Can you share a screenshot? Kevin ... View more

Hello, The NMC UI is used to access the Protection Manager and Provisioning Manager features of Unified Manager.  The NMC only communicates with the UM server, not any of the managed hosts.  The monitors for SV and SM are both 30 minutes: snapmirrorTimestamp  Normal   30 minutes   30 minutes   08 Jan 02:11 Normal   08 Jan 01:43 svTimestamp      Normal   30 minutes   30 minutes   08 Jan 02:12 Normal   08 Jan 01:43 Are you inquiring about seeing relationships in the external relationships panel of the NMC? Thanks, Kevin ... View more

Hi Hannes, I don't suspect that the behavior is browser related but wanted to ensure that you had tried multiple browsers. We will require a support bundle to analyze the logs.  I have sent you a PM requesting the same. Thanks, Kevin ... View more

Hi Hannes, 1) Which browser are you using?  2) Does this ever happen on the initial launch or only after you have closed OCSM and reopened it?  3) Have you already opened a support case?  They would need to review the logs collected via a support bundle to determine if there is any obvious answers to your problems. I am not aware of any known bug that would describe this behavior. Thanks, Kevin ... View more

I cannot find a newer version of that TR, however you might also consult the UM 5.2 Install Guide for further instructions on MSCS setup. I am not aware of of any requirement that the SAN disks belong to NetApp unless you use SnapDrive to attach the LUNs - in that case they will need to be on NetApp. Thanks, Kevin ... View more

Hi, I am not aware of any such report in Unified Manager. Thanks, Kevin ... View more

Based on your description I believe the cause of the failure is the lack of support in OnCommand Host Package for storage hosted by vFilers: http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=647436 Discovery, back up and restore operations of VMware objects fail if they are hosted on Multistore. OnCommand Unified Manager Host Package does not support Multistore.   Therefore, you cannot discover, backup and restore VMware objects. Thanks, Kevin ... View more

Unified Manager can only track and reports data on transfers under its control.  Kevin ... View more

Hi, You can use these reports to find out the amount of data moved during data protection jobs:   dp-transfer-backup-individual DP Transfer Backup, Individual   dp-transfer-backup-daily  DP Transfer Backup, Daily   dp-transfer-backup-weekly DP Transfer Backup, Weekly   dp-transfer-backup-monthly DP Transfer Backup, Monthly   dp-transfer-backup-quarterly DP Transfer Backup, Quarterly   dp-transfer-backup-yearly DP Transfer Backup, Yearly   dp-transfer-mirror-individual DP Transfer Mirror, Individual   dp-transfer-mirror-daily  DP Transfer Mirror, Daily   dp-transfer-mirror-weekly DP Transfer Mirror, Weekly   dp-transfer-mirror-monthly DP Transfer Mirror, Monthly   dp-transfer-mirror-quarterly DP Transfer Mirror, Quarterly   dp-transfer-mirror-yearly DP Transfer Mirror, Yearly   dp-transfer-dataset-daily DP Transfer Dataset, Daily   dp-transfer-dataset-weekly DP Transfer Dataset, Weekly   dp-transfer-dataset-monthly DP Transfer Dataset, Monthly   dp-transfer-dataset-quarterly DP Transfer Dataset, Quarterly   dp-transfer-dataset-yearly DP Transfer Dataset, Yearly DP Transfer Backup reports The DP Transfer Backup reports provide information about data transfers during the backup operation.  This table defines all fields in the DP Transfer Backup reports that DataFabric Manager server reports by default.     Field Description Relationship ID Database ID for a backup relationship Source Name Name of the source object Destination Name Name of the destination object Timestamp Indicates the start date and time of the data transfer Bytes Transferred Amount of data transferred in bytes Transfer Rate/sec The average transfer rate in kilobytes per second Transfers The number of data transfers that occur during a period of time Transfer Failures The number of failed data transfers that occur during a period of time Data Growth Growth of data in bytes from a particular point of time Duration Duration of data transfer Transfer Start Start time of the data transfer Transfer End End time of the data transfer Status Status of the data transfer job Thanks, Kevin ... View more

Hi Pascal, On the Support Communications page it gives the steps to subscribe: http://support.netapp.com/info/communications/index.html Product Communiqué Subscription Option The Product Communiqué program is an optional subscription service where important product announcements are delivered to you via e-mail. To subscribe, please create a case via the Feedback form and select My Profile and Subscriptions as Category 1 & 2. Thanks, Kevin ... View more

It is related to the 'dfm data export run' command. Kevin ... View more

You will need to find and edit the SystemManager.config file - it will be located within your user account's home directory in the ..\NetApp\SystemManager path. Once you have located the file, carefully edit the path located within the <browser> tags to reflect the path to the browser you wish to use.  I recommend using an XML aware editor such as Notepad++. Example:  <browser>C:\Program Files (x86)\Mozilla Firefox\firefox.exe</browser> ... View more

Yes, the workaround is use the CLI to edit the alarm: # dfm alarm modify -m 23:59  2 Changed time to for alarm 2 to 23:59. There will be public details at some point located here: http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=666331 ... View more

This is due to bug 666331.  As of today it is not fixed nor are there any public details. Kevin ... View more

Hi Erik, Please open a support case and attach a support bundle from your UM server.  https://kb.netapp.com/support/index?page=content&id=1014347 Generate a Support Bundle by choosing, from the Main Menu, Support/Diagnostics -> Generate a Support Bundle. This Support Bundle must be retrieved manually using SCP or SFTP with maintenance user credentials. See the Administration Guide for details. Thanks, Kevin   ... View more

Hi Gerd, Neither UM or OCR is designed or tested to run on a system with other applications.  The OCR IAG specifically states not to install it on a UM server. UM 5.2 ISG: Page 36 https://library.netapp.com/ecm/ecm_download_file/ECMP1222478 For optimal performance, the only other application that must be installed on the system running Core Package software is OnCommand Unified Manager Host Package OCR 1.2 IAG: Page 11 https://library.netapp.com/ecm/ecm_download_file/ECMP1201945 You must not install OnCommand Report on a host that runs any of the following: • OnCommand Unified Manager server • OnCommand Insight (previously known as SANscreen) Kevin ... View more