Active IQ Unified Manager Discussions
Active IQ Unified Manager Discussions
Hi
Error in DFM after instal symantec Plug-in
We had the DFM grafics performance. We instaled the symantec plug-in and this work ok but the dfm performace no change.
We saw the free space error so we have changed the database to other disk but the error is not correct
>dfm about
Version 5.2.0.16233 (5.2)
Executable Type 64-bit
Serial Number 1-50-142016
Edition Standard edition of DataFabric Manager server
Data ONTAP Operating Mode 7-Mode
Administrator Name \administrador
Host Name xxxxxxxx
Host IP Address 10.200.100.204
Host Full Name hesw146
Node limit 250 (currently managing 😎
Operating System Microsoft Windows Server 2008 R2 (Build 7600)x64 based
CPU Count 1
System Memory 4095 MB (load: 53%)
Installation Directory C:/Program Files/NetApp/DataFabric Manager/DFM Error: 1.93 GB free (7.7%)
Perf Data Directory C:/Program Files/NetApp/DataFabric Manager/DFM/perfdata
Data Export Directory C:/Program Files/NetApp/DataFabric Manager/DFM/dataExport
Database Backup Directory C:\Program Files\NetApp\DataFabric Manager\DFM\data
Reports Archival Directory C:\Program Files\NetApp\DataFabric Manager\DFM\reports
Licensed Features DataFabric Manager server: installed
Installed Plugins Storage System Config 6.5.1 (6.5.1) - storage systems and vFilers
Storage System Config 6.5.2 (6.5.2) - storage systems and vFilers
Storage System Config 6.5.3 (6.5.3) - storage systems and vFilers
Storage System Config 6.5.4 (6.5.4) - storage systems and vFilers
Storage System Config 6.5.5 (6.5.5) - storage systems and vFilers
Storage System Config 6.5.6 (6.5.6) - storage systems and vFilers
Storage System Config 6.5.7 (6.5.7) - storage systems and vFilers
Storage System Config 7.0 (7.0.0.1) - storage systems and vFilers
Storage System Config 7.0.1 (7.0.1.1) - storage systems and vFilers
Storage System Config 7.0.2 (7.0.2) - storage systems and vFilers
Storage System Config 7.0.3 (7.0.3) - storage systems and vFilers
Storage System Config 7.0.4 (7.0.4) - storage systems and vFilers
Storage System Config 7.0.5 (7.0.5) - storage systems and vFilers
Storage System Config 7.0.6 (7.0.6) - storage systems and vFilers
Storage System Config 7.0.7 (7.0.7) - storage systems and vFilers
Storage System Config 7.1 (7.1.0.1) - storage systems and vFilers
Storage System Config 7.1.1 (7.1.1.1) - storage systems and vFilers
Storage System Config 7.1.2 (7.1.2.1) - storage systems and vFilers
Storage System Config 7.1.3 (7.1.3) - storage systems and vFilers
Storage System Config 7.2 (7.2) - storage systems and vFilers
Storage System Config 7.2.1 (7.2.1.1) - storage systems and vFilers
Storage System Config 7.2.2 (7.2.2) - storage systems and vFilers
Storage System Config 7.2.3 (7.2.3) - storage systems and vFilers
Storage System Config 7.2.4 (7.2.4) - storage systems and vFilers
Storage System Config 7.2.5 (7.2.5.1) - storage systems and vFilers
Storage System Config 7.2.6 (7.2.6.1) - storage systems and vFilers
Storage System Config 7.2.7 (7.2.7) - storage systems and vFilers
Storage System Config 7.3 (7.3) - storage systems and vFilers
Storage System Config 7.3.1 (7.3.1.1) - storage systems and vFilers
Storage System Config 7.3.2 (7.3.2) - storage systems and vFilers
Storage System Config 7.3.3 (7.3.3) - storage systems and vFilers
Storage System Config 7.3.4 (7.3.4) - storage systems and vFilers
Storage System Config 7.3.5 (7.3.5.1) - storage systems and vFilers
Storage System Config 7.3.6 (7.3.6) - storage systems and vFilers
Storage System Config 7.3.7 (7.3.7) - storage systems and vFilers
Storage System Config 8.0 (8.0) - storage systems and vFilers
Storage System Config 8.0.1 (8.0.1) - storage systems and vFilers
Storage System Config 8.0.2 (8.0.2) - storage systems and vFilers
Storage System Config 8.0.3 (8.0.3) - storage systems and vFilers
Storage System Config 8.0.4 (8.0.4) - storage systems and vFilers
Storage System Config 8.1 (8.1) - storage systems and vFilers
Warning: Low disk space in the DFM install volume is causing monitoring to stop!
Make more space available or lower the monMinFreePercent DFM option!
C:\>dfm datastore setup D:\DFM_Database
Creating the destination data directories.
Required space for data:5.50 GB, Available space:36.1 GB
Stopping all services and jobs...
Copying database files to D:\DFM_Database\data.
2 archivo(s) copiado(s)
Copying perf data files to D:\DFM_Database\perfdata.
912 archivo(s) copiado(s)
Copying script output files to D:\DFM_Database\script-plugins.
Copying report output files to D:\DFM_Database\reports.
93 archivo(s) copiado(s)
Copying plugins files to D:\DFM_Database\plugins.
144 archivo(s) copiado(s)
Copying key file to D:\DFM_Database\conf\keys.
7 archivo(s) copiado(s)
Changing database configuration settings ...
Changed dbDir to D:\DFM_Database\data.
Updated dbLogDir to D:\DFM_Database\data.
Starting sql service...
Changed perfArchiveDir to D:\DFM_Database\perfdata.
Changed scriptDir to D:\DFM_Database\script-plugins.
Changed reportsArchiveDir to D:\DFM_Database\reports.
Changed pluginsDir to D:\DFM_Database\plugins.
Changed dfmencKeysDir to D:\DFM_Database\conf\keys.
Changed databaseBackupDir to D:\DFM_Database\data.
Starting services...
Thanks
Solved! See The Solution
Hi Arun
We open one case with support. They discovered the recolertor is stoped because is not enable perfAdvisorEnabled parameter.
C:\Windows\system32>dfm diag
perfAdvisorEnabled No
After send this options command for enable parameter, new data are monitoring in DFM. It is correct!!
C:\Windows\system32>dfm options set perfAdvisorEnabled=Enabled
Thanks!!
Mikel
HI,
Irrespective of moving the database using "dfm datastore setup" command; you need to have sufficient free space in the root directory else the monitoring will stop. Please make more free space in the root directory such that the warning messages are no more thrown and try again.
Thanks,
Arun
Hi
We have free space and error is active.
>dfm about
Version 5.2.0.16233 (5.2)
Executable Type 64-bit
Serial Number 1-50-142016
Edition Standard edition of DataFabric Manager server
Data ONTAP Operating Mode 7-Mode
Administrator Name xxx\dfernandezp
Host Name xxxxxxxx
Host IP Address 10.200.100.204
Host Full Name xxxxx
Node limit 250 (currently managing 😎
Operating System Microsoft Windows Server 2008 R2 (Build 7600) x64 based
CPU Count 1
System Memory 4095 MB (load: 60%)
Installation Directory C:/Program Files/NetApp/DataFabric Manager/DFM 7.24 GB free (29.1%)
Perf Data Directory D:\DFM_Database\perfdata
Data Export Directory C:/Program Files/NetApp/DataFabric Manager/DFM/dataExport
Database Backup Directory D:\DFM_Database\data
Reports Archival Directory D:\DFM_Database\reports
Database Directory D:/DFM_Database/data 25.3 GB free (63.2%)
Database Log Directory D:/DFM_Database/data 25.3 GB free (63.2%)
Licensed Features DataFabric Manager server: installed
Installed Plugins Storage System Config 6.5.........
In dfm diag (02 jul 10:12 is the time we install plug-in)
.....
Monitoring Timestamps
Timestamp Name Status Interval Default Last Updated Status Error if older than ...
ccTimestamp Error Off 4 hours Not updated ( ccMonInterval is set to Off )
cfTimestamp Error Off 5 minutes 02 jul 10:12 Error 08 jul 08:36
clusterTimestamp Error Off 15 minutes Not updated ( clusterMonInterval is set to Off )
cpuTimestamp Error 1 hour 5 minutes 08 jul 08:16 Normal 08 jul 07:36
dfTimestamp Normal 30 minutes 30 minutes 08 jul 08:11 Normal 08 jul 08:06
diskTimestamp Error 1 day 4 hours 07 jul 10:08 Normal 07 jul 08:36
envTimestamp Error Off 5 minutes 02 jul 10:13 Error 08 jul 08:36
fsTimestamp Normal 15 minutes 15 minutes 08 jul 08:28 Normal 08 jul 08:21
hostPingTimestamp Normal 1 minute 1 minute 08 jul 08:36 Normal 08 jul 08:35
ifTimestamp Error 1 day 15 minutes 07 jul 10:08 Normal 07 jul 08:36
licenseTimestamp Normal 4 hours 4 hours 08 jul 06:15 Normal 08 jul 04:36
lunTimestamp Error Off 30 minutes 02 jul 10:07 Error 08 jul 08:36
opsTimestamp Error 1 day 10 minutes 07 jul 10:07 Normal 07 jul 08:36
qtreeTimestamp Normal 8 hours 8 hours 08 jul 00:36
rbacTimestamp Error Off 1 day 02 jul 10:07 Error 08 jul 08:36
userQuotaTimestamp Error 1 week 1 day 08 jul 08:28 Normal 01 jul 08:36
sanhostTimestamp Error Off 5 minutes Not updated ( SANHostMonInterval is set to Off )
snapmirrorTimestamp Error 2 hours 30 minutes 08 jul 08:32 Normal 08 jul 06:36
snapshotTimestamp Error 1 hour 30 minutes 08 jul 08:35 Normal 08 jul 07:36
statusTimestamp Normal 10 minutes 10 minutes 08 jul 08:35 Normal 08 jul 08:26
sysInfoTimestamp Error 8 hours 1 hour 08 jul 02:11 Normal 08 jul 00:36
svTimestamp Error 2 hours 30 minutes 08 jul 06:36
svMonTimestamp Error Off 8 hours Not updated ( backupDirMonInterval is set to Off )
xmlQtreeTimestamp Normal 8 hours 8 hours 08 jul 08:35 Normal 08 jul 00:36
vFilerTimestamp Normal 1 hour 1 hour 08 jul 07:40 Normal 08 jul 07:36
vserverTimestamp Error Off 1 hour Not updated ( vserverMonInterval is set to Off )
....
Thanks
Can you perform a "dfm host discover <host id>" again and see if the monitoring resumes normal?
Thanks,
Arun
Hi
I apply the command but not view changes.
C:\Windows\system32>dfm host discover IDAN01-CTRL2
Refreshing data from host IDAN01-CTRL2.orona.es (1335) now.
C:\Windows\system32>dfm host discover IDAN01-CTRL1
Refreshing data from host IDAN01-CTRL1.orona.es (1334) now.
C:\Windows\system32>dfm host discover IDAN00-CTRL1
Refreshing data from host IDAN00-CTRL1.orona.es (1112) now.
C:\Windows\system32>dfm host discover IDAN00-CTRL2
Refreshing data from host IDAN00-CTRL2.orona.es (1114) now.
C:\Windows\system32>dfm host discover HEANL00-CTRl1
Refreshing data from host HEANL00-CTRL1.orona.es (280) now.
C:\Windows\system32>dfm host discover HEANL00-CTRl2
Refreshing data from host HEANL00-CTRL2.orona.es (281) now.
C:\Windows\system32>dfm host discover HEANL01-CTRl1
Refreshing data from host HEANL01-CTRL1.orona.es (130) now.
C:\Windows\system32>dfm host discover HEANL01-CTRl2
Refreshing data from host HEANL01-CTRL2.orona.es (131) now.
Thanks
HI,
May be you will have to go-ahead and open a support case for us to investigate further.
Thanks,
Arun
Hi Arun
We open one case with support. They discovered the recolertor is stoped because is not enable perfAdvisorEnabled parameter.
C:\Windows\system32>dfm diag
perfAdvisorEnabled No
After send this options command for enable parameter, new data are monitoring in DFM. It is correct!!
C:\Windows\system32>dfm options set perfAdvisorEnabled=Enabled
Thanks!!
Mikel