NetApp Harvest ver 1.4

[NetAppHarvests]

Hi Team,

Do we know when will harvest 1.4 available for download and does harvest 1.4 support ONTAP 9.3 ?

[AlexDawson]

My understanding is that the codebase is still waiting for clearance for public release.

For internal access to 1.4 and to confirm 9.3 support availability, please contact Yaan via email. 

[SYSTEMY_EMITEL_PL]

Hi

Are there any news about public release of v1.4?

[niels]

All,

I know you all are waiting for the official release of Harvest v1.4 to the tool chest.

As mentioned previously, the code is ready and was available NetApp-internally upon request.

The code scan that NetApp is required to perform in order to check for Open Source compliance and not violating any 3rd-party IP has been completed.

The current plan is to post Harvest v1.4 to the tool chest by end of January.

Thank you for your patience and thank you for using it in the first place.

regards, Niels 

[yannb]

Yes you can DM me.

[muzzafuzza]

Can't wait for v1.4!!

[stefanhoenig]

Also, still waiting.....

[thomasb82]

same here, still waiting 

[mattbanks]

I'd put off "hacking" 1.3 because 1.4's release was imminent (and needed for ONTAP 9.2 support.)

So today I'm finally giving up and spending time installing 1.3 while attempting to get it working because we haven't had storage metrics since last summer. 😞

[gmey]

Hi all,

we did just pass the internal code review process. We have triggered the publishing to toolchest today.

Not sure how long this will take.

If you do need Harvest v1.4 earlier - simply drop me an e-mail and I will send you the package and latest

documentation.

Keep in mind that you do need the 9.3 SDK to get it running against ONTAP 9.3

Kind regards

Georg

[mattbanks]

---

@gmey wrote:

If you do need Harvest v1.4 earlier - simply drop me an e-mail and I will send you the package and latest

documentation.

---

Great. How exactly would we do that?

[niels · Accepted solution]

All,

Harvest 1.4 has been posted to the Tool Chest on 1/22.

https://mysupport.netapp.com/tools/info/ECMLP2314554I.html?productID=61924&pcfContentID=ECMLP2314554

regards, Niels

[SrikanthReddy]

pdf is dated sep 2017 and the yum upgrade also shows 1.3  not 1.4 

can somone check if any other updates are needed for new 1.4 release

assume same process like before  replacing 1.3 to 1.4 

yum upgrade -y netapp-harvest-1.3-1.noarch.rpm

[TechopsVendor]

Hello

I am currently running harvest 1.3, have been for some time, have about 80 heads, 7-mode, C-dot, multiple Ontap versions.

Bringing up for first Ontap 9   NetApp Release 9.2P2.  Is it possible copy the cdot-9.2.0.conf from 1.4 into 1.3 to run against 9.2P2? till have to perform full upgrade? I need iscsi stats asap from the 9.2P2 kit?

-mark

[TechopsVendor]

Hello

I am currently running harvest 1.3, have been for some time, have about 80 heads, 7-mode, C-dot, multiple Ontap versions.

Bringing up for first Ontap 9   NetApp Release 9.2P2.  Is it possible copy the cdot-9.2.0.conf from 1.4 into 1.3 to run against 9.2P2? till have to perform full upgrade? I need iscsi stats asap from the 9.2P2 kit?

-mark

[yannb]

Yes, you can keep your configuration file with NetApp Harvest 1.4 coming from 1.3

[TechopsVendor]

Would i also need to update the sdk from 5.7 to 9.3 on harvest 1.3 ? or can i just use the 9.2 conf file for now?

[yannb]

SDK is usually linked to the ONTAP release. With 9.2, I believe you can keep SDK 5.7, whether you use Harvest 1.3 or 1.4

[JamesLi-wwtech]

Dear Yannb,

   My customer is also try 9.4X. 

He have some issue as below.  

[root@graphite netapp-harvest]#  /opt/netapp-harvest/netapp-worker -poller test_c6

[2018-06-11 15:57:08] [NORMAL ] WORKER STARTED [Version: 1.3] [Conf: netapp-harvest.conf] [Poller: test_c6]

[2018-06-11 15:57:08] [WARNING] Started in foreground mode; messages to STDERR are redirected to the logfile and are not visible on the console.

[2018-06-11 15:57:08] [NORMAL ] [main] Poller will monitor a [FILER] at [test_c6:443]

[2018-06-11 15:57:08] [NORMAL ] [main] Poller will use [password] authentication with username [netapp-harvest] and password [**********]

[2018-06-11 15:57:08] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error: 400 Bad

[2018-06-11 15:57:08] [WARNING] [main] system-info update failed; will try again in 10 seconds.

[2018-06-11 15:57:19] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error: 400 Bad

[2018-06-11 15:57:19] [WARNING] [main] system-info update failed; will try again in 10 seconds.

[2018-06-11 15:57:29] [WARNING] [sysinfo] Update of system-info cache DOT Version failed with reason: Server returned HTTP Error: 400 Bad

[2018-06-11 15:57:29] [WARNING] [main] system-info update failed; will try again in 10 seconds.

[yannb]

@JamesLi-wwtech Can you try upgrading to 1.4?

[JamesLi-wwtech]

Dear Yannb,

   Ok.  I will help customer to try 1.4 for 9.4