Hi all!
Bit of a weird problem with two FAS 3140 clusters, both have exemplary clean syslogs with no warnings whatsover. Yet operations manager about once a week will alert to a "enclosures failed" message with really scary content:
| Event | | Enclosures Failed |
|---|
| Source | | xxx/ |
|---|
| Severity | | |
|---|
| About | | Status of the enclosures on an appliance |
|---|
| Condition | | The following components failed Enclosure Serial No : OPS6773421DFB62 Enclosure Shelf Address : 1c.17 Enclosure Logical ID : 5:005:0cc002:1dfb62 List of Failed Power Supply Modules: ", " List of Failed Fan Modules: "1, 2" List of Failed Electronics Modules: "1, 2" List of Failed Temperature Sensor Modules (Over Temp): "3" List of Temperature Sensor Modules Warning (Over Temp): "1, 2, 3" Enclosure Serial No : OPS6773421DED14 Enclosure Shelf Address : 1a.32 Enclosure Logical ID : 5:005:0cc002:1ded14 List of Failed Power Supply Modules: ", " List of Failed Fan Modules: "1, 2" List of Failed Electronics Modules: "1, 2" List of Failed Temperature Sensor Modules (Over Temp): "3" List of Temperature Sensor Modules Warning (Over Temp): "1, 2, 3" Enclosure Serial No : OPS6773421DF9C3 Enclosure Shelf Address : 2c.17 Enclosure Logical ID : 5:005:0cc002:1df9c3 List of Failed Power Supply Modules: ", " List of Failed Fan Modules: "1, 2" List of Failed Electronics Modules: "1, 2" List of Failed Temperature Sensor Modules (Over Temp): "3" List of Temperature Sensor Modules Warning (Over Temp): "1, 2, 3" Enclosure Serial No : OPS8248721DE414 Enclosure Shelf Address : 2d.14 Enclosure Logical ID : 5:005:0cc002:1de414 List of Failed Power Supply Modules: ", " List of Failed Fan Modules: "1, 2" List of Failed Electronics Modules: "1, 2" List of Failed Temperature Sensor Modules (Over Temp): "3" List of Temperature Sensor Modules Warning (Over Temp): "1, 2, 3" Enclosure Serial No : OPS8248721DE443 Enclosure Shelf Address : 1b.31 Enclosure Logical ID : 5:005:0cc002:1de443 List of Failed Power Supply Modules: ", " List of Failed Fan Modules: "1, 2" List of Failed Electronics Modules: "1, 2" List of Failed Temperature Sensor Modules (Over Temp): "3" List of Temperature Sensor Modules Warning (Over Temp): "1, 2, 3" Enclosure Serial No : OPS8248721DE543 Enclosure Shelf Address : 1b.15 Enclosure Logical ID : 5:005:0cc002:1de543 List of Failed PoweThe following enclosures have become inactive |
|---|
|
The really nifty thing is that it happens about once a week on both clusters with no autosupport or syslog messages whatsover, also we are running performance tests on these clusters which show no interruption or pause or whatever. everything is fine.
Why would ops manager report this problem?
Ops manager 3.7.1 (with ontap 732 plugin). Ontap 732 on both clusters, mixed SATA and FC shelves environment, dfm host diag shows all bells and whistles that you would expect.
Anyone else seens something like this?
