So, I need some help with establishing an iSCSI session with SDCLI command.
I can successfully establish a session through the SnapDrive GUID, but would like to figure out how to do this with the cli command.
Here is what I have so far -shown below.
I have a session established through the SD Guid.
I ran the sdcli iscsi_initiator list -s as shown below..
I terminated the session as shown below.. However, I cannot re-establish. I get an error Incompatible IP port type specified.
I have been banging my head and cannot figure out what I am doing wrong??
C:\>sdcli iscsi_initiator list -s 1 connected iSCSI target(s): Target name: iqn.1992-08.com.netapp:sn.80335005 Number of LUNs: 0 1 iSCSI session(s): Session ID: 0xfffffa8049417018-0x4000013700000005 Microsoft iSCSI service iSCSI HBA_ID: 0 iSCSI HBA name: Root\ISCSIPRT\0000_0 iSCSI HBA description: Microsoft iSCSI Initiator 1 iSCSI connection(s): Connection ID: 0xfffffa8049417018-0x5 CID: 00 01 Initiator portal: Portal ID: 1 IP address: 10.3.90.40 IP port: 30410 Target portal: IP address: 10.3.90.41 IP port: 3260 The operation completed successfully.
C:\>sdcli iscsi_initiator terminate_session -s 0xfffffa8049417018-0x4000013700000005 The operation completed successfully.
C:\>sdcli iscsi_initiator establish_session -t iqn.1992-08.com.netapp:sn.80335005 -np 10.3.90.41 3260 Unable to establish an iSCSI session. Error: Incompatible IP port type specified. Select compatible host and target port type.