EF & E-Series, SANtricity, and Related Plug-ins

Facing error on changing management IP through SANtricity System Manager

AseemFaiz

Netapp error.jpg

I'm Changing the management IP port 1 through SANtricity System Manager. Any one faced this issue?

 

1 ACCEPTED SOLUTION

NetApp_AU

Is SANtricity System Manager accessible through both controllers?


Are there any other alerts on the array?


I am curious if the web server on one of the controllers is hung preventing the array's configuration from being updated through the web GUI.

 

A stagger reboot of the controllers would clear a hung web server, but do not try this if the array is reporting any alerts or if multipathing is not configured.

Team NetApp

View solution in original post

1 REPLY 1

NetApp_AU

Is SANtricity System Manager accessible through both controllers?


Are there any other alerts on the array?


I am curious if the web server on one of the controllers is hung preventing the array's configuration from being updated through the web GUI.

 

A stagger reboot of the controllers would clear a hung web server, but do not try this if the array is reporting any alerts or if multipathing is not configured.

Team NetApp
Public