EF & E-Series, SANtricity, and Related Plug-ins

NetApp E2724 VMware iSCSI Direct-Attach

LUCA_PERINI
5,341 Views

Hi All,

 

I'm configuring E2724 iSCSI Direct-Attach on two vmware host.

VMware host had one nic connected on host port 1 of controller A and anather nic connected on host port 1 of controller B.

I use VMware software iscsi initiator.

I can ping, vmkping both controller and nc -z command can connect on both controller. but when i scan storage adapter i can't find any path

 

any ideas?

 

Thanks

Luca 

 

3 REPLIES 3

Sahana
5,162 Views

Hi,

 

Please refer the iscsi express guide https://library.netapp.com/ecm/ecm_get_file/ECMP1532522 to check if configured correctly.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

JGeorge-19
5,087 Views

Hi Luca,

Wondering you resolved the issue? I have similar issue with E series.

 

Jgeorge

LUCA_PERINI
5,068 Views

Hi JGeorge,

 

my issue is resolved and was related to server side.

I must to setup the default vlan 1 on vic 1227 configuration of cisco ucs c220m4.

the strange was that without vlan configuration on vic 1227 i can ping and vmkping the storage but can't retrive the volume presented.

Public